Siemens 6AG2541-1AD00-4AB0 Communication Module Inquiry

Part number

6AG2541-1AD00-4AB0

Brand

Siemens

Category

Communication & Networking

Product type

Communication & Networking

Lifecycle

Phase Out Announce

Dimensions

15.5 x 15.00 x 4.5 cm

Net weight

0.269 Kg

Source category

SIPLUS extreme RAIL CM PtP

• The module operates within a wide temperature range of -40°C to +70°C continuously. Keep dimensions 15.5 x 15.00 x 4.5 cm and net weight 0.269 Kg unchanged while comparing project documents and product image evidence.
• It withstands short-term thermal peaks up to 85°C for ten-minute durations effectively.
• Serial communication supports Freeport, 3964(R), USS, and MODBUS RTU master or slave modes.
• Data transfer rates reach up to 115200 Kbit/s for efficient information exchange.
• Physical connectivity is provided through a standard 9-pin D-sub plug interface.
• Conformal coating protects internal circuitry against moisture, dust, and corrosive atmospheric elements.

• Identify this unit as part of the SIPLUS extreme RAIL communication product family. Use the source path SIPLUS extreme RAIL communication / SIPLUS extreme RAIL CM PtP to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• The specific sub-category is listed under SIPLUS extreme RAIL CM PtP modules.
• Base hardware originates from the S7-1500 series communication module architecture design.
• Model designation includes the HF TX variant indicating high-frequency transmission capabilities.

Parameters are factual source fields retained for model review.

• Recorded dimensions are 15.5 cm in length, 15.00 cm in width, and 4.5 cm in height. Check product-owned images, label text, connector area, and submitted model references against the exact 6AG2541-1AD00-4AB0 record before publication.
• Net weight is documented at 0.269 Kg for logistical planning and mounting considerations.
• Lifecycle status is currently listed as Phase Out Announce for inventory tracking purposes.
• Product class B indicates review restrictions requiring direct contact with designated review contacts.
• Operating temperature threshold OT4 defines the specific environmental rating for this hardware.

• Visual inspection should confirm the presence of the 9-pin D-sub connector housing. Review Siemens 6AG2541-1AD00-4AB0 as Communication & Networking with source category SIPLUS extreme RAIL CM PtP, recorded lifecycle Phase Out Announce, and submitted model identity.
• Check for labeling that matches the part number 6AG2541-1AD00-4AB0 clearly on the casing.
• Verify the rail-mounting clips are intact for secure installation on standard DIN rails.
• Ensure the conformal coating appears uniform without visible cracks or peeling defects.

• Prepare project documents specifying the required serial protocol mode for communication setup. Keep dimensions 15.5 x 15.00 x 4.5 cm and net weight 0.269 Kg unchanged while comparing project documents and product image evidence.
• Confirm ambient temperature ranges in the installation area match the -40 to +70°C spec.
• Document any specific mounting constraints related to the 15.5 x 15.00 x 4.5 cm size.
• Note the Phase Out Announce status when planning long-term maintenance and support strategies.

• Source parameter review confirms the technical specifications align with SIPLUS extreme standards.
• Project document review should address the review restrictions associated with Product Class B.
• Technical assessment verifies the suitability of RS-232 interfaces for legacy system integration.
• Final verification requires checking the physical condition against the recorded dimensional weights.