Siemens 6AG2158-3AD10-4XA0 SIPLUS NET PN/PN Coupler T1 RAIL

Part number

6AG2158-3AD10-4XA0

Brand

Siemens

Category

Communication & Networking

Product type

Communication & Networking

Lifecycle

Active Product

Dimensions

15.4 x 12.9 x 8.4 cm

Net weight

0.254 Kg

Source category

SIPLUS NET PN/PN Coupler T1 RAIL

• Supports deterministic data exchange between maximum four PN controllers per network segment. Keep dimensions 15.4 x 12.9 x 8.4 cm and net weight 0.254 Kg unchanged while comparing project documents and product image evidence.
• Enables transmission via PROFIsafe, I/O, MSI, MSO, and data set communication protocols.
• Operates within a temperature range of -40°C to +70°C for continuous duty.
• Withstands overtemperature class OT4 with ST1/2 rating allowing 85°C for ten minutes.
• Features redundant current infeed for the PN connection via SIMATIC BusAdapter hardware.
• Supplied without the SIMATIC BusAdapter component requiring separate configuration for power input.

• Identified as part of the SIPLUS extreme RAIL gateway product family series. Use the source path SIPLUS extreme RAIL gateways / SIPLUS NET PN/PN Coupler T1 RAIL to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• Specifically classified as the SIPLUS NET PN/PN Coupler T1 RAIL variant type.
• Carries the active product lifecycle status indicating ongoing manufacturing and support review details.
• Classified under product class B which indicates review restrictions apply to this item.

Parameters are factual source fields retained for model review.

• Physical dimensions are recorded as 15.4 cm by 12.9 cm by 8.4 cm size. Check product-owned images, label text, connector area, and submitted model references against the exact 6AG2158-3AD10-4XA0 record before publication.
• Net weight is listed as 0.254 Kg for logistical and mounting planning purposes.
• Network boundary crossing capabilities allow for extended distributed control system architectures.
• Conformal coating provides additional protection against moisture, dust, and corrosive industrial agents.
• Power supply redundancy requires integration with application context SIMATIC BusAdapter modules for operation.

• Visual inspection should confirm the presence of conformal coating on internal circuitry. Review Siemens 6AG2158-3AD10-4XA0 as Communication & Networking with source category SIPLUS NET PN/PN Coupler T1 RAIL, recorded lifecycle Active Product, and submitted model identity.
• Check terminal block markings for correct PN port identification and wiring guidance.
• Verify label details match the part number 6AG2158-3AD10-4XA0 exactly for accuracy.
• Ensure housing integrity shows no signs of physical damage or thermal degradation.

• Confirm the need for deterministic communication across distinct PROFINET network segments. Keep dimensions 15.4 x 12.9 x 8.4 cm and net weight 0.254 Kg unchanged while comparing project documents and product image evidence.
• Verify that the application environment exceeds standard IP20 protection requirements significantly.
• Assess whether redundant power supply via BusAdapter is required for critical uptime.
• Review project documentation to ensure OT4 thermal rating meets local climate conditions.

• Source parameter review confirms the active status and specific environmental ratings listed.
• Project document review should address the exclusion of the BusAdapter in shipment.
• Technical specification alignment ensures application context with existing PROFIsafe enabled controller setups.
• review note restrictions require direct contact with designated Siemens review contacts for handling.