Siemens 6AG1931-2FC21-7AA0 SIPLUS PS DC UPS Module

Part number

6AG1931-2FC21-7AA0

Brand

Siemens

Category

Power Supplies

Product type

Power Supplies

Lifecycle

Phase Out Announce

Dimensions

13.5 x 15.00 x 11.00 cm

Net weight

1.078 Kg

Source category

SIPLUS PS DC UPS module 40 A

• Input voltage specification is recorded as 24 V DC, ensuring standard industrial power application context for the module's internal circuitry and operational requirements.
• Output capability is listed as 24 V DC with a maximum current of 40 A, supporting continuous load operations for connected industrial equipment.
• The module operates within an extended ambient temperature range of -25 to +70 degrees Celsius, listed for harsh environmental conditions.
• Conformal coating is applied to the internal components to protect against moisture, dust, and corrosive agents common in industrial environments.
• Physical dimensions are documented as 13.5 x 15.00 x 11.00 cm, allowing for compact integration into standard control cabinet layouts.
• Net weight is specified at 1.078 Kg, facilitating manageable handling and installation procedures during system maintenance or setup phases.

• The part number 6AG1931-2FC21-7AA0 identifies this specific variant within the SIPLUS DC UPS family of products.
• Lifecycle status is noted as Phase Out Announce, indicating potential future discontinuation of this specific model configuration.
• Product class B designation implies review restrictions, requiring direct contact with designated Siemens review contacts for handling inquiries.
• The base model reference 6EP1931-2FC21 serves as the foundational platform for this enhanced SIPLUS version.

Parameters are factual source fields retained for model review.

• Review the submitted model number 6AG1931-2FC21-7AA0 to verify alignment with specific project technical requirements and constraints.
• Source parameter review confirms the 24 V DC input/output configuration matches standard industrial power distribution networks.
• Check the temperature rating of -25 to +70 °C against the intended installation environment's thermal conditions.
• Verify the 40 A output capacity meets the peak and continuous load demands of the connected control systems.
• Confirm the presence of conformal coating is necessary for the specific environmental exposure levels of the deployment site.

• Inspect the product image for the Siemens branding and SIPLUS labeling to confirm visual identification of the unit.
• Review the physical form factor shown in images against the stated dimensions of 13.5 x 15.00 x 11.00 cm.
• Check terminal block configurations visible in images to ensure they match the expected 24 V DC connection points.
• Examine the housing material and coating appearance in images to assess suitability for the specified harsh environment conditions.

• Prepare detailed project documentation specifying the required 24 V DC/40 A output for the uninterruptible power supply module.
• Include environmental data sheets confirming the need for -25 to +70 °C operating range and conformal coating protection.
• Document the specific application context to justify the selection of the SIPLUS series over standard power supply units.
• List all relevant technical constraints and interface requirements to facilitate accurate assessment during the inquiry review process.

• Note the Phase Out Announce status when planning long-term system upgrades or expansions involving this component.
• Consider the review restriction policy associated with Product Class B when evaluating logistics and handling procedures.
• Ensure all technical specifications align with the actual operational needs before proceeding with formal inquiry submission.
• Consult technical resources regarding the base 6EP1931-2FC21 model for additional context on the underlying hardware architecture.