Siemens 6AG1931-2EC21-2AA0 SIPLUS PS DC-UPS Unit

Part number

6AG1931-2EC21-2AA0

Brand

Siemens

Category

Power Supplies

Product type

SIPLUS PS DC-UPS 24 V/15 A based on 6EP1931-2EC21 with conformal coating, -25…+60 °C

Lifecycle

Active Product

Dimensions

13.5 x 14.00 x 7.00 cm

Net weight

0.469 Kg

Source category

SIPLUS PS DC UPS module 15 A

• Output voltage is rated at 24 volts direct current for consistent power delivery to connected control systems.
• Maximum current capacity reaches 15 amperes, supporting high-load applications within the specified industrial automation framework.
• Conformal coating is applied to the circuit board to shield against moisture, dust, and corrosive chemical exposure.
• Operating temperature range spans from -25 degrees Celsius up to +60 degrees Celsius for broad environmental adaptability.
• Physical dimensions measure approximately 13.5 by 14.00 by 7.00 centimeters for compact panel mounting integration.
• Net weight is recorded at 0.469 kilograms, facilitating easy handling and installation without requiring heavy support structures.

• Base model reference includes the 6EP1931-2EC21 configuration upon which the SIPLUS enhanced version is constructed.
• The SIPLUS designation indicates specific enhancements for industrial use cases requiring higher durability and environmental resistance.
• Part number 6AG1931-2EC21-2AA0 uniquely identifies this specific variant with its extended temperature and coating specifications.
• Lifecycle status is listed as Active Product, indicating ongoing manufacturing or support review details for project planning.

Parameters are factual source fields retained for model review.

• Voltage specification confirms a steady 24 VDC output listed for standard PLC and I/O module power requirements.
• Current rating of 15 A allows for powering multiple devices simultaneously without exceeding the unit's capacity limits.
• Temperature tolerance ensures functionality in unheated enclosures or outdoor installations subject to significant seasonal fluctuations.
• Coating type provides essential protection against condensation and airborne contaminants common in heavy industrial processing areas.
• Dimensional data assists in verifying physical fit within existing control cabinet layouts and mounting rail configurations.

• Visual inspection should confirm the presence of labeling indicating the full part number and Siemens branding.
• Check for any visible signs of physical damage or corrosion on the housing before initiating an inquiry.
• Verify connector types and pin configurations match the specific wiring diagrams for your target application setup.
• Ensure the conformal coating appears intact and uniform across the visible surfaces of the internal circuitry.

• Gather project documentation specifying the required voltage, current load, and environmental conditions for accurate matching.
• Prepare technical drawings showing the intended mounting location and recorded space within the control enclosure.
• List any specific certification or compliance requirements that must be met for your regional industrial standards.
• Define the timeline for project implementation to align with potential manufacturing or logistical scheduling constraints.

• Confirm the product class indicates review restrictions and requires direct contact with designated Siemens representatives.
• Review the submitted model number to ensure it matches the exact specifications needed for your application.
• Source parameter review should validate that the 24V/15A output meets the electrical demands of your equipment.
• Project document review helps identify any additional accessories or mounting hardware required for proper installation.