Siemens 6AG1620-0AA00-7AA0 SIPLUS PN/CAN Link Gateway

Part number

6AG1620-0AA00-7AA0

Brand

Siemens

Category

Communication & Networking

Product type

Communication & Networking

Lifecycle

Active Product

Dimensions

12.5 x 9.00 x 8.5 cm

Net weight

0.275 Kg

Source category

SIPLUS PN/CAN LINK

• This module converts PROFINET protocols to CANopen standards for industrial communication needs. Keep dimensions 12.5 x 9.00 x 8.5 cm and net weight 0.275 Kg unchanged while comparing project documents and product image evidence.
• It supports both CAN 2.0 A and CAN 2.0 B protocol specifications directly.
• The device acts as a CANopen manager node within the network topology structure.
• It also functions as a CiA301/302 compliant CANopen slave device for integration.
• Conformal coating provides additional environmental resistance against moisture and chemical exposure.
• Physical dimensions measure approximately twelve point five by nine point zero by eight point five centimeters.

• The base hardware originates from the 6BK1620-0AA00-0AA0 reference design platform. Use the source path Automation technology / SIPLUS extreme gateways / SIPLUS PN/CAN LINK to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• SIPLUS extreme branding indicates specific ruggedization for demanding industrial operating conditions.
• PN/CAN designation identifies the primary protocol conversion capabilities of this unit.
• Lifecycle status is recorded as an Active Product for current project planning.

Parameters are factual source fields retained for model review.

• Net weight is listed at zero point two seven five kilograms for logistics. Check product-owned images, label text, connector area, and submitted model references against the exact 6AG1620-0AA00-7AA0 record before publication.
• IP20 rating applies to standard indoor installation without additional protective enclosures.
• Temperature range spans from minus forty degrees to plus seventy degrees Celsius.
• Conformal coating specification ensures durability in challenging industrial environment conditions.
• Network interface supports both master manager and slave device operational modes.

• Visual inspection should confirm the presence of conformal coating on circuit boards. Review Siemens 6AG1620-0AA00-7AA0 as Communication & Networking with source category SIPLUS PN/CAN LINK, recorded lifecycle Active Product, and submitted model identity.
• Label verification must match the part number 6AG1620-0AA00-7AA0 exactly.
• Connector types should align with standard PROFINET and CAN physical interfaces.
• Physical dimensions must correspond to the recorded twelve point five centimeter width.

• Gather project requirements specifying PROFINET to CANopen conversion needs clearly. Keep dimensions 12.5 x 9.00 x 8.5 cm and net weight 0.275 Kg unchanged while comparing project documents and product image evidence.
• Document environmental conditions including expected temperature ranges and exposure levels.
• Verify network topology requirements for manager versus slave device configuration.
• Prepare technical specifications for review against the submitted model parameters.

• Class B designation indicates review restrictions requiring direct review contacts contact procedures. Check product-owned images, label text, connector area, and submitted model references against the exact 6AG1620-0AA00-7AA0 record before publication.
• Source parameter review should validate all technical specifications before submission.
• Project document review ensures alignment with specific industrial application requirements.
• Contact your designated Siemens review contacts for further technical clarification if needed.