6AG1503-3CB00-2AA0 SIPLUS NET OLM/G12 V4 Inquiry

Part number

6AG1503-3CB00-2AA0

Brand

Siemens

Category

Communication & Networking

Product type

SIPLUS NET OLM/G12 V4

Lifecycle

Active Product

Dimensions

18.00 x 14.2 x 4.8 cm

Net weight

0.424 Kg

Source category

SIPLUS OLM optical link module

• The module operates as an optical link module within the SIPLUS NET family of communication products. Keep dimensions 18.00 x 14.2 x 4.8 cm and net weight 0.424 Kg unchanged while comparing project documents and product image evidence.
• It incorporates conformal coating technology to protect internal components from moisture, dust, and corrosive agents.
• The operational temperature range extends from -25 degrees Celsius up to +60 degrees Celsius for consistent performance.
• Physical dimensions are recorded at 18.00 cm by 14.2 cm by 4.8 cm for spatial planning purposes.
• The net weight is listed as 0.424 kg, which assists in logistical handling and mounting considerations.
• The product lifecycle status is currently active, indicating ongoing production and support from the manufacturer.

• The primary part number for this specific variant is 6AG1503-3CB00-2AA0 as listed in the database.
• The normalized identifier removes hyphens, resulting in the sequence 6AG15033CB002AA0 for system matching.
• This model is categorized under the broader SIPLUS optical networks with OLM product group structure.
• It falls specifically within the SIPLUS OLM optical link module sub-category for precise classification.

Parameters are factual source fields retained for model review.

• Review the base model 6GK1503-3CB00 to understand the foundational architecture before considering the SIPLUS enhancements.
• Verify that the -25 to +60 degree Celsius range meets the specific environmental demands of your site.
• Check the physical footprint of 18.00 x 14.2 x 4.8 cm against your rack or panel space.
• Confirm the 0.424 kg weight aligns with your structural load calculations for mounting installations.
• Ensure the active product status matches your long-term maintenance and support requirements for the project.

• Inspect images for the conformal coating appearance which distinguishes this unit from standard industrial modules.
• Note the labeling clarity on the device faceplate to ensure correct identification during physical inspection.
• Observe the connector types visible in the imagery to verify interface application context with your network setup.
• Check the overall build quality and housing integrity shown in the product photographs for durability assessment.

• Prepare your project documentation specifying the required quantity and intended application environment for the module.
• Include details about the operating temperature extremes to confirm suitability for your specific industrial location.
• Provide information on your existing network infrastructure to facilitate a thorough technical review process.
• List any special handling or packaging requirements needed for the shipment of these sensitive electronic components.

• Cross-reference the part number 6AG1503-3CB00-2AA0 with your internal bill of materials for accuracy.
• Validate the technical specifications against your engineering standards before proceeding with the formal inquiry submission.
• Consider the extended temperature rating as a key factor for deployments in uncontrolled industrial environments.
• Submit all relevant project details to ensure a comprehensive and accurate response from the technical team.