6AG1503-2CC00-2AA0 SIPLUS NET OLM/G11-1300 V4

Part number

6AG1503-2CC00-2AA0

Brand

Siemens

Category

Communication & Networking

Product type

SIPLUS NET OLM/G11-1300 V4

Lifecycle

Active Product

Dimensions

17.7 x 14.00 x 4.8 cm

Net weight

0.422 Kg

Source category

SIPLUS OLM optical link module

• Optical link module utilizing 1300 nm shaft length for extended transmission distances in fiber optic networks. Keep dimensions 17.7 x 14.00 x 4.8 cm and net weight 0.422 Kg unchanged while comparing project documents and product image evidence.
• Features one RS-485 interface alongside one glass fiber optic cable connection via two BFOC sockets.
• Includes signaling contact functionality and a dedicated test port for monitoring network performance and integrity.
• Conformal coating provides additional protection against moisture, dust, and corrosive agents in industrial settings.
• Operates effectively within an extended ambient temperature range from minus twenty-five to plus sixty degrees Celsius.
• Physical dimensions measure approximately 17.7 by 14.00 by 4.8 centimeters with a net weight of 0.422 kilograms.

• Base model derived from the 6GK1503-2CC00 series with specific enhancements for extreme environmental conditions. Use the source path SIPLUS optical networks with OLM / SIPLUS OLM optical link module to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• Product classification indicates active status with specific review restrictions requiring direct contact with Siemens representatives.
• Category placement falls under SIPLUS optical networks, specifically within the SIPLUS OLM optical link module segment.
• Version designation V4 reflects the current iteration of the hardware design and firmware configuration.

Parameters are factual source fields retained for model review.

• Verify the required operating temperature range matches the specified minus twenty-five to plus sixty degrees Celsius limit.
• Confirm that the fiber optic cable type aligns with the 1300 nm wavelength specification for optimal signal transmission.
• Ensure physical mounting space accommodates the dimensions of 17.7 x 14.00 x 4.8 cm without obstruction.
• Check that the RS-485 interface requirements are met by the connected control system or network infrastructure.
• Review the need for signaling contact and test port access during installation and maintenance planning phases.

• Inspect the front panel for the two BFOC socket openings used for fiber optic cable insertion.
• Look for labeling indicating the part number 6AG1503-2CC00-2AA0 and the Siemens brand identifier clearly.
• Note the presence of the signaling contact terminals and test port connectors on the device housing.
• Examine the overall build quality and conformal coating application for signs of industrial-grade durability.

• Prepare detailed project documentation specifying the environmental conditions and temperature ranges for the installation site.
• List the required fiber optic cable types and lengths needed to connect the BFOC sockets properly.
• Define the specific RS-485 communication parameters and signaling contact functions required for the network setup.
• Include any special handling or storage requirements due to the review restriction classification of the item.

• Confirm that the review restriction policy is understood before initiating any inquiry preparation or exchange processes.
• Ensure all technical specifications match the project requirements to avoid application context issues during integration.
• Document the exact part number 6AG1503-2CC00-2AA0 in all correspondence to prevent model confusion.
• Verify that the inquiry includes all necessary technical details for accurate assessment and response generation.