Inquiry for Siemens 6AG1433-2BA20-7AA0 Power Supply Unit

Part number

6AG1433-2BA20-7AA0

Brand

Siemens

Category

Power Supplies

Product type

3-phase, 24 V DC

Lifecycle

Active Product

Dimensions

13.00 x 13.5 x 5.5 cm

Net weight

0.505 Kg

Source category

3-phase, 24 V DC

• Input voltage specification covers a range of 400 to 500 volts alternating current for three-phase connection.
• Output capability delivers a stabilized 24 volts direct current at a maximum load of 5 amperes continuously.
• Operating temperature range extends from minus 40 degrees Celsius to plus 70 degrees Celsius for ambient conditions.
• Startup functionality remains effective at temperatures as low as minus 25 degrees Celsius during initial power application.
• Physical dimensions are recorded as 13.00 centimeters by 13.5 centimeters by 5.5 centimeters for mounting planning.
• Net weight is listed at 0.505 kilograms, facilitating handling calculations and structural support assessments for installation.

• The part number 6AG1433-2BA20-7AA0 identifies this specific variant within the SIPLUS smart product family line.
• This model represents an upgraded version of the base PSU300S series with specialized environmental protections applied.
• Classification indicates it belongs to class B, which involves specific review restrictions requiring review contacts contact.
• Lifecycle status is currently active, meaning the component remains in production and supported by the manufacturer.

Parameters are factual source fields retained for model review.

• Verify that the incoming power source matches the required 400-500 V three-phase input specification accurately.
• Ensure load requirements do not exceed the 24 V DC/5 A output capacity for safe operation.
• Confirm that ambient temperatures will remain within the stated -40 to +70 °C operational window limits.
• Check physical clearance dimensions against the intended enclosure space to ensure proper fit and ventilation flow.
• Review weight distribution plans to accommodate the 0.505 kg mass securely during mechanical assembly processes.

• Inspect the product label for the exact alphanumeric code 6AG1433-2BA20-7AA0 to confirm model identity clearly.
• Examine the housing integrity for any signs of damage that might compromise the conformal coating protection layer.
• Check terminal block connections for corrosion or wear that could affect electrical continuity and signal stability.
• Review the overall physical condition to ensure the unit meets the standards for industrial deployment readiness.

• Gather all relevant project documentation including schematic diagrams and power requirement tables for comprehensive evaluation.
• Prepare detailed environmental data sheets specifying expected temperature extremes and humidity levels at the installation site.
• Compile mechanical drawings showing mounting locations and spatial constraints to verify dimensional application context with existing setups.
• List any specific compliance or certification requirements mandated by your local industry regulations or internal standards.

• All technical parameters are derived directly from the manufacturer's published specifications for this specific part number.
• The classification as a Class B item implies specific handling procedures regarding review and review contacts interactions.
• Prospective buyers should consult their designated Siemens review contacts for detailed logistical and contractual information regarding inquiry preparation.
• This inquiry page serves as a starting point for technical discussion and does not constitute a sales offer.