Siemens 6AG1333-3BA10-7AA0 Industrial Power Supply Inquiry

Part number

6AG1333-3BA10-7AA0

Brand

Siemens

Category

Power Supplies

Product type

1-phase and 2-phase, 24 V DC

Lifecycle

Active Product

Dimensions

13.5 x 15.00 x 8.00 cm

Net weight

0.663 Kg

Source category

1-phase and 2-phase, 24 V DC

• Input voltage ranges from 120 to 230-500 V AC for flexible integration. Keep dimensions 13.5 x 15.00 x 8.00 cm and net weight 0.663 Kg unchanged while comparing project documents and product image evidence.
• Output specification provides a steady 24 V DC at 5 A current capacity.
• Conformal coating ensures protection against moisture, dust, and corrosive industrial atmospheres.
• Operating temperature range spans from -25 °C to +70 °C for harsh sites.
• Physical dimensions measure 13.5 x 15.00 x 8.00 cm for compact mounting.
• Net weight is recorded at 0.663 Kg for easy handling and installation logistics.

• Part number 6AG1333-3BA10-7AA0 identifies this specific SIPLUS PSU200M variant. Use the source path Automation technology / SIPLUS modular / 1-phase and 2-phase, 24 V DC to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• The normalized identifier 6AG13333BA107AA0 is used for digital catalog searches.
• Brand designation confirms origin from Siemens automation technology division.
• Lifecycle status is listed as Active Product for ongoing project planning.

Parameters are factual source fields retained for model review.

• Review the input voltage range of 120/230-500 V AC for suitability. Check product-owned images, label text, connector area, and submitted model references against the exact 6AG1333-3BA10-7AA0 record before publication.
• Verify the 24 V/5 A DC output meets your load requirements.
• Check the -25…+70 °C operating range against your environmental conditions.
• Confirm the 13.5 x 15.00 x 8.00 cm footprint fits your panel.
• Note the 0.663 Kg net weight for shipping and handling calculations.

• Inspect the front label for the exact Siemens part number verification. Review Siemens 6AG1333-3BA10-7AA0 as 1-phase and 2-phase, 24 V DC with source category 1-phase and 2-phase, 24 V DC, recorded lifecycle Active Product, and submitted model identity.
• Check the terminal block configuration for correct wiring connection points.
• Observe the housing integrity to ensure conformal coating coverage is visible.
• Review mounting holes alignment for standard DIN rail installation procedures.

• Prepare your facility's ambient temperature data for suitability assessment. Keep dimensions 13.5 x 15.00 x 8.00 cm and net weight 0.663 Kg unchanged while comparing project documents and product image evidence.
• Document the required input voltage range for your local power grid.
• Calculate the total DC load current to ensure 5 A capacity suffices.
• Specify any additional environmental protection needs beyond standard conformal coating.

• Confirm the product class A designation for standard review guideline eligibility.
• Verify that the stabilized power supply input matches your source voltage.
• Ensure the output polarity aligns with your connected control system devices.
• Review project documents to confirm the -25…+70 °C range is sufficient.