6ES7590-0BH00-0AA0 Active Backplane Bus for SIMATIC ET 200MP

Part number

6ES7590-0BH00-0AA0

Brand

Siemens

Category

I/O Modules

Product type

Active backplane bus

Lifecycle

Active Product

Dimensions

30.6 x 11.6 x 3.2 cm

Net weight

0.314 Kg

Source category

Active backplane bus

• This item is classified as an active backplane bus within the broader automation technology portfolio. Keep dimensions 30.6 x 11.6 x 3.2 cm and net weight 0.314 Kg unchanged while comparing project documents and product image evidence.
• It belongs to the SIMATIC ET 200MP family, supporting advanced distributed I/O configurations.
• The product lifecycle status is recorded as an Active Product for ongoing project planning.
• Physical dimensions are listed as 30.6 cm in length, 11.6 cm in width, and 3.2 cm in height.
• The net weight of the unit is documented at 0.314 kilograms for logistics assessment.
• It requires separate request of the S7-1500 mounting rail and associated slot covers.

• Identify the part number 6ES7590-0BH00-0AA0 for precise matching in system documentation reviews. Use the source path Automation technology / SIMATIC ET 200MP / Active backplane bus to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• Verify the normalized part number 6ES75900BH000AA0 when cross-referencing internal database records.
• Confirm the brand association with Siemens for quality and specification alignment checks.
• Check the source category path to ensure correct classification within automation technology sectors.

Parameters are factual source fields retained for model review.

• Review the eight-slot capacity to determine if it meets the specific I/O density requirements. Check product-owned images, label text, connector area, and submitted model references against the exact 6ES7590-0BH00-0AA0 record before publication.
• Assess the hot-swapping feature necessity for maintaining continuous operation during module changes.
• Examine the dimensional constraints to verify fitment within the designated control cabinet space.
• Consider the weight specification for structural load calculations in rack or rail mounting.
• Note that the IM 155-5 PN HF firmware version V4.4.1 or higher is referenced.

• Inspect the front panel for slot indicators and connection points relevant to the design.
• Verify the side profile matches the stated depth of 3.2 centimeters for clearance.
• Check the labeling area for the printed part number and brand identification marks.
• Observe the mounting interface details to understand how it connects to the IM module.

• Prepare the exact part number 6ES7590-0BH00-0AA0 for submission in the inquiry form.
• Gather project documentation specifying the need for an eight-slot active backplane bus solution.
• Confirm the firmware version of the IM 155-5 PN HF in the target system.
• List any additional requirements for mounting rails and slot covers needed for installation.

• Ensure the inquiry includes all necessary technical details for accurate inquiry team response generation.
• Cross-check the physical dimensions against existing cabinet layouts to prevent installation conflicts.
• Verify that the hot-swapping capability aligns with the operational continuity requirements of the site.
• Confirm that separate request of mounting hardware is accounted for in the project scope.