Siemens 6FE1242-6TM10-0BB1 SIMATIC ET 200SP TM ECC Module Inquiry

Part number

6FE1242-6TM10-0BB1

Brand

Siemens

Category

I/O Modules

Product type

SIMATIC ET 200SP TM ECC 2xPWM ST Chargecontroller f

Lifecycle

Active Product

Dimensions

7.7 x 6.5 x 2.3 cm

Net weight

0.032 Kg

Source category

SIMATIC ET 200SP ECC charging controllers

• Dual PWM technology enables independent control of two separate charging points simultaneously. Keep dimensions 7.7 x 6.5 x 2.3 cm and net weight 0.032 Kg unchanged while comparing project documents and product image evidence.
• Supports conductive charging protocols compliant with IEC61851 Mode 3 standards for safety.
• Features two Control Pilot outputs for communication with electric vehicle charging equipment.
• Includes two Plug Present inputs to detect physical connection status at each point.
• Provides two digital output switch contacts for controlling external contactors effectively.
• Offers two digital input read contacts for monitoring contactor or connector locking states.

• Brand designation is clearly marked as Siemens for industrial automation component verification. Use the source path Components f. electric vehicle charging stations / SIMATIC ET 200SP ECC charging controllers to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• Product class indicates active lifecycle status requiring specific review contacts contact for review.
• Category classification places this item under components for electric vehicle charging stations.
• Specific sub-category identifies the unit as a SIMATIC ET 200SP ECC charging controller.

Parameters are factual source fields retained for model review.

• Physical dimensions are recorded as 7.7 cm in width by 6.5 cm in depth. Check product-owned images, label text, connector area, and submitted model references against the exact 6FE1242-6TM10-0BB1 record before publication.
• Module height is listed at 2.3 cm for compact DIN rail mounting configurations.
• Net weight is specified at 0.032 kg for logistics and handling documentation purposes.
• Operating temperature range spans from negative thirty degrees Celsius to sixty degrees Celsius.
• Terminal configuration includes dedicated pins for dual PWM and digital I/O signals.

• Visual inspection should confirm the presence of dual PWM terminal blocks on the front. Review Siemens 6FE1242-6TM10-0BB1 as SIMATIC ET 200SP TM ECC 2xPWM ST Chargecontroller f with source category SIMATIC ET 200SP ECC charging controllers, recorded lifecycle Active Product, and submitted model identity.
• Check labeling for the exact part number 6FE1242-6TM10-0BB1 printed on the housing.
• Verify the SIMATIC ET 200SP branding indicates correct series membership for integration.
• Ensure no physical damage exists to the connector pins or housing structure.

• Review project documents to confirm the need for dual channel EV charging control.
• Verify IEC61851 Mode 3 compliance requirements for the intended electric vehicle infrastructure.
• Check existing PLC architecture for SIMATIC ET 200SP bus connector application context needs.
• Prepare technical specifications including temperature ranges and digital input/output signal requirements.

• Lifecycle status is recorded as Active Product for current project planning considerations.
• review restrictions apply; contact designated Siemens review contacts for handling procedures clarification.
• Technical parameters should be cross-referenced with original manufacturer datasheets for accuracy.
• Inquiry submission requires detailed project context to ensure appropriate technical support access.