6ES7590-0BD00-0AA0 Active Backplane Bus for ET 200MP Systems

Part number

6ES7590-0BD00-0AA0

Brand

Siemens

Category

I/O Modules

Product type

Active backplane bus

Lifecycle

Active Product

Dimensions

16.4 x 11.1 x 2.7 cm

Net weight

0.159 Kg

Source category

Active backplane bus

• Designed for integration with the IM 155-5 PN HF interface module starting from firmware version V4.4.1. Keep dimensions 16.4 x 11.1 x 2.7 cm and net weight 0.159 Kg unchanged while comparing project documents and product image evidence.
• Supports hot swapping operations for connected S7-1500 input and output modules within the ET 200MP rack.
• Features a compact physical footprint measuring 16.4 cm in length, 11.1 cm in width, and 2.7 cm in height.
• Weighs approximately 0.159 kilograms, ensuring minimal load impact on the mounting rail structure.
• Classified as an Active Product, indicating current manufacturing status and ongoing technical support review details.
• Requires separate request of the S7-1500 mounting rail and associated slot covers for complete assembly.

• Brand designation recorded as Siemens, aligning with the broader SIMATIC automation product family standards.
• Product type identified specifically as an Active backplane bus within the industrial control hardware catalog.
• Lifecycle status listed as Active Product, confirming current production and documentation review details for reference.
• Part number 6ES7590-0BD00-0AA0 serves as the unique identifier for inquiry preparation and technical specification reviews.

Parameters are factual source fields retained for model review.

• Physical dimensions are recorded at 16.4 x 11.1 x 2.7 cm for spatial planning in control cabinets.
• Net weight is specified as 0.159 Kg, which assists in calculating total rack load requirements accurately.
• Slot capacity is fixed at four positions, limiting the number of simultaneous I/O module insertions.
• application context with IM 155-5 PN HF is noted, requiring firmware level V4.4.1 or higher for operation.
• Mounting rail and slot covers are excluded from the package, necessitating separate inquiry preparation for installation.

• Visual inspection should confirm the presence of four distinct module slots along the front faceplate.
• Check for labeling clarity, ensuring the part number 6ES7590-0BD00-0AA0 is legible on the housing.
• Verify connector integrity on the rear side, which interfaces with the upstream communication module.
• Assess physical condition for any signs of damage that might affect electrical contact reliability.

• Review project documentation to confirm the need for a four-slot active backplane in the ET 200MP setup.
• Verify that the existing IM 155-5 PN HF module meets the minimum firmware requirement of V4.4.1.
• Prepare specifications for the separate S7-1500 mounting rail and slot covers required for full assembly.
• Document the exact quantity needed to ensure accurate sourcing and logistical planning for the automation project.

• Ensure the inquiry includes the normalized part number 6ES75900BD000AA0 for precise database matching.
• Cross-reference the physical dimensions against recorded cabinet space to prevent installation conflicts during deployment.
• Confirm that the hot-swapping feature aligns with the operational continuity requirements of the target facility.
• Validate that all necessary accessories, such as rails and covers, are accounted for in the overall bill of materials.