6ES7545-5DA00-0AB0 CM DP for ET 200SP CPU Module

Part number

6ES7545-5DA00-0AB0

Brand

Siemens

Category

I/O Modules

Product type

CM DP for ET 200SP CPU

Lifecycle

Active Product

Dimensions

12.8 x 10.5 x 6.5 cm

Net weight

0.104 Kg

Source category

CM DP for ET 200SP CPU

• Interface type is PROFIBUS DP with a 9-pole D-sub socket connector for secure cable attachment. Keep dimensions 12.8 x 10.5 x 6.5 cm and net weight 0.104 Kg unchanged while comparing project documents and product image evidence.
• Operational mode allows configuration as a DP master controlling up to 125 DP slaves simultaneously.
• Physical dimensions are recorded at 12.8 cm in length, 10.5 cm in width, and 6.5 cm in height.
• Net weight is listed as 0.104 Kg, indicating a lightweight design for easy mounting on DIN rails.
• Product lifecycle status is currently Active, ensuring ongoing support and documentation review details for engineers.
• Category classification places this item under IO modules, specifically within the communication subsystems of automation technology.

• Brand designation is Siemens, a recognized manufacturer of industrial automation and drive technologies worldwide.
• Product type is identified as CM DP, which stands for Communication Module for Distributed Peripherals.
• Specific application is for the ET 200SP CPU, ensuring direct application context with this specific hardware platform.
• Part number 6ES7545-5DA00-0AB0 serves as the unique identifier for inquiry preparation and technical reference purposes.

Parameters are factual source fields retained for model review.

• Maximum slave count is set at 125 DP slaves when operating in master mode configuration.
• Connector specification requires a 9-pole D-sub socket for standard PROFIBUS cable termination procedures.
• Dimensional data includes length of 12.8 cm, width of 10.5 cm, and depth of 6.5 cm.
• Mass parameter is documented at 0.104 Kg net weight for logistics and handling calculations.
• Status field indicates Active Product, confirming current manufacturing and technical documentation support status.

• Visual inspection should confirm the presence of the 9-pole D-sub socket on the front panel.
• Labeling must clearly display the full part number 6ES7545-5DA00-0AB0 for accurate model verification.
• Physical condition check should verify no damage to the housing or connector pins during transit.
• Mounting rail clips should be intact to ensure secure installation on standard DIN rail systems.

• Verify the required PROFIBUS address settings before submitting technical questions to the support team.
• Confirm the specific ET 200SP CPU model to ensure proper communication module integration requirements.
• Prepare project documentation detailing the number of slaves needed for master mode operation analysis.
• Review dimensional constraints to ensure the 12.8 x 10.5 x 6.5 cm footprint fits the enclosure.

• Cross-reference the part number with documented Siemens documentation for detailed pinout and wiring diagrams.
• Ensure the 9-pole D-sub socket matches the cable specifications used in the existing network.
• Check the active product status to confirm long-term review details for future maintenance planning.
• Validate the 125 slave limit against the actual network topology to prevent communication bottlenecks.