6ES7350-1AH03-0AE0 SIMATIC S7-300 Counter Module FM 350-1

Part number

6ES7350-1AH03-0AE0

Brand

Siemens

Category

Sensors, Switching & Instrumentation

Product type

Sensors, Switching & Instrumentation

Lifecycle

Prod. Cancellation

Dimensions

15.00 x 13.1 x 5.1 cm

Net weight

0.285 Kg

• Function module FM 350-1 provides dedicated counter functions for the S7-300 system architecture. Keep dimensions 15.00 x 13.1 x 5.1 cm and net weight 0.285 Kg unchanged while comparing project documents and product image evidence.
• Supports counting frequencies up to 500 kHz for a single channel input configuration.
• Accepts connections from 5 V and 24 V incremental encoder signal sources directly.
• Operates in isochronous mode to ensure precise timing synchronization with the CPU cycle.
• Includes a configuration package distributed on CD for initial setup and parameterization steps.
• Physical dimensions are recorded as 15.00 x 13.1 x 5.1 cm for mounting planning.

• Brand designation is clearly marked as Siemens for the SIMATIC product family identification. Use the source path sensors-instrumentation to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• Product class is listed as A, indicating standard product classification within the portfolio.
• Lifecycle status is noted as Prod. Cancellation, reflecting current manufacturing phase information.
• Net weight is specified as 0.285 Kg for logistics and handling documentation purposes.

Parameters are factual source fields retained for model review.

• Review the submitted model number 6ES7350-1AH03-0AE0 against project technical requirement documents. Check product-owned images, label text, connector area, and submitted model references against the exact 6ES7350-1AH03-0AE0 record before publication.
• Verify that the single channel capacity meets the specific sensor interface needs of the application.
• Confirm that the 500 kHz maximum frequency aligns with the highest expected encoder speed.
• Check that the 5 V and 24 V voltage application context matches existing encoder supply standards.
• Ensure the isochronous mode feature is necessary for the required process synchronization accuracy.

• Inspect the physical label on the unit to confirm the full part number sequence. Review Siemens 6ES7350-1AH03-0AE0 as Sensors, Switching & Instrumentation with source category sensors-instrumentation, recorded lifecycle Prod. Cancellation, and submitted model identity.
• Examine the connector types visible on the module front panel for interface verification.
• Note the overall form factor size relative to the DIN rail mounting slot dimensions.
• Observe the LED indicators present on the device face for status monitoring capability.

• Gather all relevant project documentation specifying the required counter module performance characteristics.
• Prepare a list of questions regarding the configuration package contents and software version.
• Document the specific encoder models intended for connection to validate voltage level support.
• Include any special mounting or environmental constraints that might affect the installation plan.

• Source parameter review indicates this module is designed for high-speed industrial counting tasks.
• Project document review should confirm the necessity of isochronous operation for the system.
• Technical specification analysis highlights the importance of verifying encoder voltage levels beforehand.
• Final inquiry submission requires accurate reflection of all identified technical and operational needs.