6ES7274-1XF30-0XA0 SIMATIC S7-1200 Simulator Module

Part number

6ES7274-1XF30-0XA0

Brand

Siemens

Category

I/O Modules

Product type

SIM 1274 simulator

Lifecycle

Active Product

Dimensions

8.4 x 5.00 x 2.9 cm

Net weight

0.021 Kg

Source category

SIM 1274 simulator

• Module type is classified as a simulator within the SIMATIC S7-1200 family of automation components. Keep dimensions 8.4 x 5.00 x 2.9 cm and net weight 0.021 Kg unchanged while comparing project documents and product image evidence.
• Designed for integration with CPU 1211 and CPU 1212 processor units in standard rack configurations.
• Provides eight discrete input channels for simulating DC 24V signals during system validation processes.
• Operates on a DC 24V power supply requirement consistent with standard industrial control panel voltages.
• Physical dimensions are recorded as 8.4 cm in length, 5.00 cm in width, and 2.9 cm in height.
• Net weight is listed at 0.021 Kg, indicating a lightweight design for easy handling and mounting.

• Brand designation is confirmed as Siemens, a recognized manufacturer of industrial automation and drive technologies.
• Product classification falls under the SIM 1274 simulator category within the special modules segment.
• Lifecycle status is recorded as Active Product, indicating ongoing production or support review details in catalogs.
• Part number 6ES7274-1XF30-0XA0 serves as the primary identifier for sourcing and technical reference purposes.

Parameters are factual source fields retained for model review.

• Input configuration consists of eight switches allowing manual simulation of digital signal states for testing.
• Voltage specification requires a DC 24V supply to ensure proper operation within the control system.
• application context extends to CPU 1211 and CPU 1212 models, limiting use to these specific processor types.
• Form factor dimensions allow for compact installation in standard DIN rail or panel mount arrangements.
• Weight parameter suggests minimal impact on overall rack load calculations during mechanical assembly planning.

• Visual inspection should confirm the presence of eight input switches on the front panel interface.
• Labeling must clearly display the full part number 6ES7274-1XF30-0XA0 for accurate inventory verification.
• Connector pins should be examined for integrity, ensuring no damage to the communication interface contacts.
• Housing condition must be assessed for physical defects that could affect mounting or electrical safety.

• Verify the target CPU model matches either 1211 or 1212 before submitting technical specifications.
• Confirm the control system voltage level is DC 24V to ensure operational application context with the module.
• Document the specific application requirements for input simulation to justify the selection of this simulator unit.
• Prepare project documentation referencing the active product lifecycle status for long-term maintenance planning considerations.

• Cross-reference the part number with documented Siemens documentation to validate technical specifications and pinouts.
• Ensure the inquiry includes all necessary project details to facilitate accurate technical assessment by inquiry team.
• Review the dimensional constraints to verify physical fit within the intended control cabinet or rack space.
• Confirm that the eight-input configuration meets the specific simulation requirements of the target automation process.