Siemens 6ES7193-6UP00-0DP1 Potential Distributor Module

Part number

6ES7193-6UP00-0DP1

Brand

Siemens

Category

I/O Modules

Product type

I/O Modules

Lifecycle

Active Product

Dimensions

12.3 x 4.2 x 2.9 cm

Net weight

0.046 Kg

• The module operates as a PotDis-BaseUnit Typ P1, designed for potential distribution tasks in automated environments. Keep dimensions 12.3 x 4.2 x 2.9 cm and net weight 0.046 Kg unchanged while comparing project documents and product image evidence.
• It supports seventeen P1 potentials alongside one P2 potential, allowing for flexible electrical circuit management.
• Push-In terminal technology is utilized for connection points, facilitating quick and secure wiring installation procedures.
• The physical dimensions are recorded as 12.3 x 4.2 x 2.9 cm, fitting standard rack mounting configurations.
• Net weight is listed at 0.046 Kg, contributing to minimal load on supporting DIN rail structures.
• Packaging unit information indicates that each shipment contains one piece of this specific distributor module.

• Identify the unit by the full part number 6ES7193-6UP00-0DP1 when reviewing technical documentation or catalogs.
• The normalized part number 6ES71936UP000DP1 may appear in certain database systems or digital indexes.
• Brand attribution is clearly marked as Siemens, ensuring correct manufacturer verification during the inquiry process.
• Category classification places this item under I/O Modules, specifically within the potential distributor sub-type.

Parameters are factual source fields retained for model review.

• Review the WxH specification of 15mm x 117mm to ensure proper spatial planning for installation.
• Note the disconnection configuration where P1, P2, and AUX rails are disconnected from the left base unit.
• Verify the potential count requirements against the seventeen P1 and one P2 capacity listed in specifications.
• Check the terminal type requirement to confirm application context with Push-In connection methods for your project.
• Confirm the packaging unit size matches your inventory needs, as each unit is sold as one piece.

• Visual inspection should confirm the light-colored housing characteristic associated with this specific potential distributor model.
• Ensure the terminal block layout matches the Push-In connection style described in the technical parameters.
• Check for clear labeling of the part number 6ES7193-6UP00-0DP1 on the module faceplate or side.
• Verify the overall form factor aligns with the stated dimensions of 12.3 x 4.2 x 2.9 cm.

• Prepare your project documentation to reference the exact part number 6ES7193-6UP00-0DP1 for accurate processing.
• Include specific quantity requirements based on the packaging unit of one piece per individual module.
• Detail any special mounting or spatial constraints related to the 15mm width and 117mm height.
• Specify the need for Push-In terminal application context to ensure the correct technical variant is reviewed.

• Cross-reference the seventeen P1 potentials with your system's electrical distribution requirements before submission.
• Confirm the left-side disconnection feature meets your specific wiring topology and safety isolation needs.
• Validate the net weight of 0.046 Kg against structural load calculations for your mounting rail.
• Ensure the Push-In terminal type aligns with your existing tooling and wiring installation protocols.