6ES7193-6BP20-0BF0 SIMATIC ET 200SP BaseUnit

Part number

6ES7193-6BP20-0BF0

Brand

Siemens

Category

I/O Modules

Product type

BaseUnits

Lifecycle

Active Product

Dimensions

12.2 x 4.2 x 3.4 cm

Net weight

0.057 Kg

Source category

BaseUnits

• Physical dimensions measure approximately 12.2 cm in width, 4.2 cm in height, and 3.4 cm in depth for compact mounting. Keep dimensions 12.2 x 4.2 x 3.4 cm and net weight 0.057 Kg unchanged while comparing project documents and product image evidence.
• The net weight of the unit is recorded at 0.057 kilograms, allowing for lightweight integration into dense control cabinet layouts.
• Terminal configuration includes four auxiliary terminals alongside primary connection points for enhanced signal routing capabilities.
• Push-in terminal design enables rapid wiring installation without requiring additional tools for standard conductor types.
• Bridged connections extend to the left side, facilitating daisy-chaining or power distribution to adjacent modules efficiently.
• Lifecycle status indicates active production, ensuring continued support and documentation review details for ongoing engineering projects.

• Part number 6ES7193-6BP20-0BF0 identifies this specific BaseUnit variant within the Siemens portfolio. Use the source path Automation technology / SIMATIC ET 200SP / BaseUnits to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• BU type F0 designation specifies the particular terminal block configuration and mechanical housing style.
• The product class falls under BaseUnits, serving as the mounting foundation for I/O modules.
• Brand attribution confirms manufacturing origin under the Siemens industrial automation division standards.

Parameters are factual source fields retained for model review.

• Width dimension of 20 mm aligns with standard ET 200SP module spacing requirements. Check product-owned images, label text, connector area, and submitted model references against the exact 6ES7193-6BP20-0BF0 record before publication.
• Height measurement of 117 mm accommodates vertical stacking within standardized rack configurations.
• Auxiliary terminal count of four provides additional connectivity options for sensor or actuator signals.
• Bridging direction to the left supports specific wiring schemes for contiguous module arrangements.

• Visual inspection should confirm the presence of push-in terminals on the front faceplate. Review Siemens 6ES7193-6BP20-0BF0 as BaseUnits with source category BaseUnits, recorded lifecycle Active Product, and submitted model identity.
• Check for clear labeling indicating the BU20-P8+A4+0B model specification on the housing.
• Verify the physical condition of the bridging contacts located on the left side edge.
• Ensure the overall housing integrity matches the stated dimensions of 12.2 x 4.2 x 3.4 cm.

• Gather current project documentation specifying the need for ET 200SP base components. Keep dimensions 12.2 x 4.2 x 3.4 cm and net weight 0.057 Kg unchanged while comparing project documents and product image evidence.
• Confirm the required quantity of units needed for the planned automation system expansion.
• Review existing wiring diagrams to ensure application context with the left-side bridging configuration.
• Prepare technical questions regarding terminal capacity and conductor size limitations for the push-in design.

• Cross-reference the part number with documented Siemens catalogs for updated technical datasheets.
• Validate the active lifecycle status to ensure long-term supply chain stability for the project.
• Compare physical dimensions against recorded space in the target control cabinet enclosure.
• Document all technical parameters for inclusion in the formal inquiry preparation inquiry submission.