Siemens 6ES7193-6BP00-0BA1 BaseUnit BU15-P16+A0+2B/T

Part number

6ES7193-6BP00-0BA1

Brand

Siemens

Category

I/O Modules

Product type

BaseUnits

Lifecycle

Active Product

Dimensions

12.3 x 4.00 x 2.9 cm

Net weight

0.047 Kg

Source category

BaseUnits

• Model designation identifies this as a BU type A1 unit with specific terminal configurations. Keep dimensions 12.3 x 4.00 x 2.9 cm and net weight 0.047 Kg unchanged while comparing project documents and product image evidence.
• Push-in terminals provide secure electrical connections without requiring additional screwdriver tools.
• The unit lacks auxiliary terminals, focusing on primary signal transmission and power distribution.
• Bridging is configured to the left side, ensuring proper signal continuity across modules.
• Integrated temperature acquisition allows for direct monitoring of thermal conditions at the connection point.
• Physical dimensions measure 15x 117 mm, fitting standard DIN rail mounting requirements.

• Part number 6ES7193-6BP00-0BA1 corresponds to the specific BU15-P16+A0+2B/T variant. Use the source path Automation technology / SIMATIC ET 200SP / BaseUnits to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• Brand attribution links this hardware directly to Siemens industrial automation product lines.
• Lifecycle status indicates this model remains an active product for current projects.
• Category classification places this item firmly within the broader I/O modules segment.

Parameters are factual source fields retained for model review.

• Overall physical footprint records dimensions of 12.3 x 4.00 x 2.9 cm for spatial planning. Check product-owned images, label text, connector area, and submitted model references against the exact 6ES7193-6BP00-0BA1 record before publication.
• Net weight is documented at 0.047 Kg, contributing minimal load to mounting structures.
• Source category path confirms placement under Automation technology and SIMATIC ET 200SP hierarchy.
• Product type is explicitly listed as BaseUnits, defining its role in the module stack.
• Terminal style is specified as push-in, influencing the tooling requirements for installation tasks.

• Visual inspection should confirm the presence of push-in terminal slots on the front face. Review Siemens 6ES7193-6BP00-0BA1 as BaseUnits with source category BaseUnits, recorded lifecycle Active Product, and submitted model identity.
• Check for the left-side bridging configuration visible on the connector interface area.
• Verify the labeling matches the part number 6ES7193-6BP00-0BA1 for accurate identification.
• Ensure the physical size aligns with the recorded 15x 117 mm width specification.

• Prepare project documentation specifying the need for SIMATIC ET 200SP base units. Keep dimensions 12.3 x 4.00 x 2.9 cm and net weight 0.047 Kg unchanged while comparing project documents and product image evidence.
• Confirm that push-in terminal technology meets the wiring standards of your facility.
• Review the temperature acquisition requirement to ensure it aligns with sensor inputs.
• Document the left-bridging necessity to avoid incorrect module selection during the inquiry.

• Cross-reference the part number with internal asset registers to verify existing inventory needs.
• Evaluate the active product status to ensure long-term support for maintenance cycles.
• Assess the dimensional constraints against recorded rack space in the control cabinet design.
• Confirm the absence of auxiliary terminals does not conflict with specific wiring diagrams.