6ES7193-6AP20-0AA0 SIMATIC ET 200SP BusAdapter BA SCRJ/RJ45

Part number

6ES7193-6AP20-0AA0

Brand

Siemens

Category

I/O Modules

Product type

BusAdapters

Lifecycle

Active Product

Dimensions

8.1 x 6.8 x 3.00 cm

Net weight

0.067 Kg

Source category

BusAdapters

• This device operates as a media converter bridging fiber optic and copper network segments within the automation infrastructure.
• It provides one SC RJ fiber optic connection point for high-speed optical signal transmission over longer distances.
• A single RJ45 port allows connection to standard twisted-pair Ethernet cables for local network interfacing.
• The component belongs to the BusAdapters product class, specifically tailored for ET 200SP system expansion.
• Physical dimensions measure approximately 8.1 cm in width, 6.8 cm in depth, and 3.00 cm in height.
• The net weight is recorded at 0.067 kg, indicating a lightweight construction listed for dense rack mounting.

• The part number 6ES7193-6AP20-0AA0 uniquely identifies this specific bus adapter variant within the Siemens portfolio.
• Normalization of the identifier yields 6ES71936AP200AA0 for consistent database indexing and search retrieval processes.
• The product lifecycle status is listed as Active Product, confirming current manufacturing and support review details.
• Source categorization places this item under Automation technology, specifically within the SIMATIC ET 200SP family.

Parameters are factual source fields retained for model review.

• Review the physical footprint of 8.1 x 6.8 x 3.00 cm to ensure adequate space in control cabinets.
• Verify the net weight of 0.067 Kg against structural load requirements for DIN rail mounting configurations.
• Confirm the presence of one SC RJ fiber optic connector for optical network segment integration needs.
• Check for the inclusion of one RJ45 copper interface to facilitate standard Ethernet cable connections.
• Assess the media converter functionality for converting signals between fiber optic and copper transmission mediums.

• Inspect the front panel labeling to confirm the printed part number matches 6ES7193-6AP20-0AA0 exactly.
• Examine the SC RJ port housing for any visible damage or debris that could affect optical alignment.
• Locate the RJ45 jack and verify its integrity, ensuring pins are not bent or corroded internally.
• Observe the overall casing condition, noting any signs of wear, discoloration, or physical deformation on surfaces.

• Prepare project documentation specifying the required quantity of 6ES7193-6AP20-0AA0 units for your automation setup.
• Detail the specific network topology requirements, highlighting the need for fiber-to-copper media conversion points.
• Include technical drawings or cabinet layouts demonstrating the intended mounting location and spatial constraints.
• List any additional interface cards or modules that will connect directly to this bus adapter unit.

• Cross-reference the source category path to ensure alignment with Automation technology and SIMATIC ET 200SP standards.
• Validate that the short description accurately reflects the dual-media capability of SC RJ and RJ45 ports.
• Ensure all dimensional and weight parameters match the provided source data for accurate logistical planning.
• Confirm that the inquiry process focuses on technical specifications rather than commercial terms or review details status.