Siemens 6ES7155-5BA00-0AB0 IM 155-5 DP ST Interface Module

Part number

6ES7155-5BA00-0AB0

Brand

Siemens

Category

I/O Modules

Product type

IM 155-5

Lifecycle

Active Product

Dimensions

15.4 x 15.1 x 5.00 cm

Net weight

0.396 Kg

Source category

IM 155-5

• Model designation identifies this unit as the IM 155-5 DP ST variant within the broader ET 200MP family of products.
• The module includes a dedicated PROFIBUS connection plug, listed as part number 6ES7972-0BB70-0XA0, for immediate network integration.
• Physical dimensions are recorded at 15.4 x 15.1 x 5.00 cm, allowing for compact mounting in standard control cabinet configurations.
• Net weight is specified as 0.396 Kg, contributing to minimal load on DIN rail mounting systems during installation procedures.
• Lifecycle status is currently active, indicating ongoing production support and review details for new system deployments and expansions.
• Product class A indicates standard handling procedures apply, with potential review options adhering to established company guidelines.

• Verify the full part number 6ES7155-5BA00-0AB0 against project documentation to ensure correct component selection for your system.
• Confirm that the PROFIBUS DP ST interface matches the communication requirements of your existing S7-1500 controller setup.
• Check the included plug specification 6ES7972-0BB70-0XA0 to ensure it aligns with your cable and connector inventory.
• Review the source category path Automation technology to SIMATIC ET 200MP for proper classification in your records.

Parameters are factual source fields retained for model review.

• The maximum module count of twelve S7-1500 units defines the expansion capacity for this specific interface configuration.
• Dimensional data suggests careful planning is needed for rack space allocation within dense control panel layouts.
• Weight parameters are low, reducing mechanical stress on mounting hardware compared to heavier industrial communication devices.
• Active lifecycle status implies current technical documentation and support resources are maintained by the manufacturer for reference.
• The product phase-out notice referenced in SIOS 109989704 requires attention for long-term strategic planning purposes.

• Ensure images clearly display the front label showing the complete Siemens part number for accurate visual verification.
• Photographs should highlight the PROFIBUS connector area to confirm the presence and type of the included plug.
• Side views may assist in verifying the physical depth and height relative to other installed ET 200MP components.
• Close-ups of the module housing can help identify any physical damage or wear prior to final inquiry preparation decisions.

• Gather your current system architecture diagrams to determine if twelve module slots meet your expansion needs.
• Prepare a list of required PROFIBUS cables and connectors to ensure seamless integration with the included plug.
• Document any specific environmental conditions such as temperature or vibration that might affect the interface module performance.
• Compile project timelines to coordinate the inquiry submission with your overall automation upgrade or maintenance schedule.

• Note the mention of a planned product phase-out referenced in SIOS 109989704 for long-term planning purposes.
• Cross-reference the part number with documented Siemens resources to confirm current technical specifications and documentation updates.
• Consider the implications of the phase-out notice when evaluating the lifecycle and support duration for this unit.
• Verify all dimensional and weight data against your specific mounting constraints before finalizing the inquiry submission process.