Siemens 6ES7148-4CA60-0AA0 PM-O Power Module Output

Part number

6ES7148-4CA60-0AA0

Brand

Siemens

Category

I/O Modules

Product type

PM-O power module output

Lifecycle

Active Product

Dimensions

13.4 x 7.3 x 6.8 cm

Net weight

0.176 Kg

Source category

PM-O power module output

• Product classification identifies this unit as a PM-O power module output component within the broader industrial automation portfolio.
• The operational lifecycle status is recorded as Active Product, indicating current manufacturing support and documentation review details.
• Electrical specifications require a DC 2x24V input configuration to properly energize connected electronic modules in the rack.
• Physical dimensions are listed as 13.4 x 7.3 x 6.8 cm, allowing for compact mounting in standard control cabinets.
• Net weight is documented at 0.176 Kg, contributing minimal load to the overall mechanical structure of the assembly.
• The device integrates directly with the ET 200 PRO series, serving as a critical node for power distribution.

• The primary identifier for this component is the part number 6ES7148-4CA60-0AA0, used for precise catalog referencing.
• Normalized representation removes hyphens, resulting in the string 6ES71484CA600AA0 for database indexing and search optimization purposes.
• Brand attribution clearly links this hardware to Siemens, ensuring authenticity and alignment with their engineering standards.
• Category placement falls under I/O modules, specifically within the sub-segment of PM-O power module outputs.

Parameters are factual source fields retained for model review.

• Source parameter review confirms the inclusion of the bus module as a standard component within the delivered unit.
• Dimensional analysis indicates a footprint of 13.4 cm in length, 7.3 cm in width, and 6.8 cm in height.
• Mass verification records the net weight at 0.176 Kg, which is relevant for structural load calculations.
• Voltage requirement specification mandates a DC 2x24V supply, defining the electrical environment necessary for operation.
• System application context notes that the connection module PM-O 6ES7194-4BH00-0AA0 is request separately for full functionality.

• Visual inspection should verify the presence of the integrated bus module attached to the main power unit body.
• Labeling on the housing must display the full part number 6ES7148-4CA60-0AA0 for accurate model identification.
• Connector orientation and pin configurations should align with standard ET 200 PRO module slot requirements.
• Physical condition checks should confirm no visible damage to the housing or internal components upon receipt.

• Review project documentation to confirm the need for DC 2x24V power distribution within the ET 200 PRO rack.
• Verify spatial constraints in the control cabinet to ensure the 13.4 x 7.3 x 6.8 cm dimensions fit.
• Check if the separate connection module PM-O 6ES7194-4BH00-0AA0 has been included in the overall bill of materials.
• Prepare technical questions regarding integration specifics if the existing bus infrastructure requires clarification before submission.

• Confirm the active product status to ensure long-term review details and support for the specified hardware model.
• Cross-reference the normalized part number 6ES71484CA600AA0 with internal databases to avoid request errors during submission.
• Ensure the inquiry specifies the exact voltage requirements to prevent mismatched power supply configurations in the design.
• Document the separate request requirement for the connection module to maintain accurate project budgeting and planning.