Inquiry for Siemens 6ES7143-5BF00-0BA0 Digital I/O Module

Part number

6ES7143-5BF00-0BA0

Brand

Siemens

Category

I/O Modules

Product type

Digital I/O modules

Lifecycle

Active Product

Dimensions

17.7 x 4.7 x 4.00 cm

Net weight

0.167 Kg

Source category

Digital I/O modules

• The module operates with 24 V DC power supply for reliable digital signal transmission. Keep dimensions 17.7 x 4.7 x 4.00 cm and net weight 0.167 Kg unchanged while comparing project documents and product image evidence.
• It provides four digital inputs and four digital outputs for comprehensive control capabilities.
• Each output channel supports a current load of up to 0.5 Amperes effectively.
• The housing achieves a Degree of Protection rating of IP67 for dust and water resistance.
• Eight M8 connectors are integrated to ensure secure and standardized wiring connections.
• The device is classified as an Active Product within the Siemens portfolio lifecycle.

• Identify the part number 6ES7143-5BF00-0BA0 on the front label of the unit. Use the source path Automation technology / SIMATIC ET 200AL / I/O modules / Digital I/O modules to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• Verify the brand name Siemens printed clearly on the module casing surface.
• Check the product type designation as a Digital I/O module for confirmation.
• Confirm the category classification under IO modules within the automation technology range.

Parameters are factual source fields retained for model review.

• Physical dimensions are recorded as 17.7 cm in length for spatial planning. Check product-owned images, label text, connector area, and submitted model references against the exact 6ES7143-5BF00-0BA0 record before publication.
• The width is listed as 4.7 cm to assist in rack mounting calculations.
• Depth measurement stands at 4.00 cm for enclosure fitment verification purposes.
• Net weight is specified as 0.167 Kg for logistics and handling estimates.
• The source category path includes Automation technology and SIMATIC ET 200AL sections.

• Inspect the front panel for clear labeling of the part number identifier. Review Siemens 6ES7143-5BF00-0BA0 as Digital I/O modules with source category Digital I/O modules, recorded lifecycle Active Product, and submitted model identity.
• Examine the M8 connector ports for any visible signs of physical damage.
• Check the terminal block area for proper alignment and secure fitting.
• Review the overall housing integrity for cracks or deformation in the casing.

• Gather project requirements specifying the need for IP67 rated digital I/O solutions.
• Prepare technical drawings showing the required mounting space and connector orientation.
• List the specific voltage levels and current loads expected in the application.
• Document any environmental conditions that necessitate the robust ET 200AL design.

• Ensure all technical parameters match the specific needs of the control system.
• Verify the IP67 rating is sufficient for the intended installation environment.
• Confirm the 24 V DC operation aligns with existing power distribution networks.
• Cross-reference the M8 connector count with the required wiring diagram specifications.