6ES7143-5AH00-0BL0 SIMATIC ET 200AL Digital Input Module

Part number

6ES7143-5AH00-0BL0

Brand

Siemens

Category

I/O Modules

Product type

IO-Link I/O modules

Lifecycle

Active Product

Dimensions

17.7 x 5.5 x 5.5 cm

Net weight

0.182 Kg

Source category

IO-Link I/O modules

• The module features sixteen digital inputs operating at 24 V DC with a current limit of 0.5 A per channel.
• Physical dimensions are recorded as 17.7 cm in length, 5.5 cm in width, and 5.5 cm in height for spatial planning.
• Net weight is listed at 0.182 Kg, facilitating easy handling during installation procedures within automated control panels.
• The degree of protection is specified as IP67, ensuring resistance against dust ingress and temporary water immersion conditions.
• Eight M12 connectors are integrated directly into the housing, allowing for straightforward wiring connections to peripheral sensors.
• Lifecycle status is currently active, indicating ongoing production support and continued review details for new industrial system deployments.

• Brand designation is clearly marked as Siemens, identifying the manufacturer responsible for the engineering and quality standards.
• Product classification falls under IO-Link I/O modules, distinguishing it from standard discrete I/O or analog signal units.
• The part number 6ES7143-5AH00-0BL0 serves as the primary identifier for inquiry preparation inquiries and technical reference searches.
• Normalized part number 6ES71435AH000BL0 removes hyphens for database indexing and systematic inventory management purposes.

Parameters are factual source fields retained for model review.

• Input voltage specification is fixed at 24 V DC, aligning with common industrial control system power distribution standards.
• Current capacity per input channel is rated at 0.5 A, sufficient for driving typical inductive and capacitive loads.
• Connector type utilizes M12 interfaces, providing standardized screw-locking mechanisms for vibration-resistant electrical connections in machinery.
• Protection rating IP67 confirms suitability for harsh environments where exposure to dust and occasional washing occurs frequently.
• Module form factor supports DIN rail mounting or direct panel integration depending on the specific cabinet design layout.

• Visual inspection should confirm the presence of eight M12 connector ports aligned along the front face of the unit.
• Labeling must display the full part number 6ES7143-5AH00-0BL0 clearly for verification against inquiry request and documentation.
• Housing integrity appears solid with no visible cracks, ensuring the IP67 seal remains effective for environmental protection.
• Terminal blocks or connection points should be examined for corrosion or damage prior to initiating any installation process.

• Review project documentation to verify that 24 V DC input requirements match the existing control system architecture.
• Confirm physical space constraints within the enclosure to ensure the 17.7 cm length fits the designated mounting area.
• Check wiring diagrams to ensure M12 connector types align with the sensor cables planned for the automation setup.
• Prepare specific technical questions regarding IO-Link communication parameters if advanced diagnostics or configuration are required.

• All technical data presented is sourced directly from documented Siemens product specifications and manufacturer documentation records.
• Users are advised to cross-reference these details with their specific application requirements before submitting formal inquiries.
• Dimensional and weight data should be used for preliminary planning only; actual installation may vary slightly.
• For comprehensive technical support, consult the documented Siemens documentation portal or contact documented technical assistance channels.