6ES7143-4BF00-0AA0 Digital Expansion Module Details

Part number

6ES7143-4BF00-0AA0

Brand

Siemens

Category

I/O Modules

Product type

Digital expansion modules

Lifecycle

Active Product

Dimensions

13.7 x 7.3 x 6.5 cm

Net weight

0.176 Kg

Source category

Digital expansion modules

• Module type is classified as a digital expansion unit for industrial automation networks. Keep dimensions 13.7 x 7.3 x 6.5 cm and net weight 0.176 Kg unchanged while comparing project documents and product image evidence.
• Input configuration includes four distinct digital input points for signal processing.
• Output configuration provides four digital output points for actuator control signals.
• Operating voltage specification is rated at 24 V DC for both inputs and outputs.
• Current capacity per output channel is recorded at 0.5 Amperes maximum load.
• Integrated module diagnostics feature allows for monitoring of operational status and faults.

• Brand designation is clearly marked as Siemens on the module housing surface. Use the source path Automation technology / I/O modules / Digital expansion modules to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• Product line identifier is SIMATIC DP, indicating PROFIBUS DP communication capability.
• System integration target is the ET 200 PRO distributed I/O architecture.
• Functional classification is electronic module, distinguishing it from mechanical components.

Parameters are factual source fields retained for model review.

• Physical dimensions are listed as 13.7 cm in length, 7.3 cm in width, and 6.5 cm in height. Check product-owned images, label text, connector area, and submitted model references against the exact 6ES7143-4BF00-0AA0 record before publication.
• Net weight of the unit is recorded at 0.176 kilograms for shipping calculations.
• Lifecycle status is currently active, meaning the product remains in current production.
• Bus module inclusion is noted, though the specific bus module may require separate request.
• Connection module reference 6ES7194-4CB50-0AA0 is mentioned as request separately for installation.

• Primary image should show the front panel with terminal block connections visible. Review Siemens 6ES7143-4BF00-0AA0 as Digital expansion modules with source category Digital expansion modules, recorded lifecycle Active Product, and submitted model identity.
• Label area must display the full part number 6ES7143-4BF00-0AA0 clearly for verification.
• Side profile view helps confirm the compact form factor and mounting rail design.
• Rear view may illustrate the backplane connector interface for the ET 200 PRO system.

• Verify the required quantity of digital expansion modules for your specific project scope. Keep dimensions 13.7 x 7.3 x 6.5 cm and net weight 0.176 Kg unchanged while comparing project documents and product image evidence.
• Confirm the need for the separate connection module 6ES7194-4CB50-0AA0 during setup.
• Check if additional bus modules are required for the PROFIBUS DP network topology.
• Ensure voltage levels match the 24 V DC specification for safe operation.

• All technical parameters are sourced directly from the manufacturer product documentation.
• Dimensions and weight figures are provided for logistical and spatial planning purposes.
• The active lifecycle status indicates ongoing manufacturing support for this component.
• Inquiries should focus on technical specifications rather than commercial transaction terms.