Inquiry for Siemens 6ES7141-5AF00-0BA0 Digital Input Module

Part number

6ES7141-5AF00-0BA0

Brand

Siemens

Category

I/O Modules

Product type

Digital I/O modules

Lifecycle

Active Product

Dimensions

17.6 x 4.5 x 4.00 cm

Net weight

0.164 Kg

Source category

Digital I/O modules

• Eight digital input channels operate at a standard 24 V DC voltage level for signal processing. Keep dimensions 17.6 x 4.5 x 4.00 cm and net weight 0.164 Kg unchanged while comparing project documents and product image evidence.
• Four M12 connectors provide standardized interface points for connecting field devices and sensors securely.
• The module achieves an IP67 protection rating, ensuring resistance against dust ingress and temporary water immersion.
• Physical dimensions are recorded as 17.6 cm in length, 4.5 cm in width, and 4.00 cm in height.
• The net weight of the unit is listed as 0.164 Kg, indicating a lightweight construction for easy mounting.
• The product lifecycle status is identified as Active Product, confirming current manufacturing and support review details.

• The part number 6ES7141-5AF00-0BA0 uniquely identifies this specific digital input configuration within the Siemens portfolio.
• This model belongs to the SIMATIC ET 200AL series, known for its modular and flexible design.
• It is classified under Digital I/O modules, specifically handling discrete input signals for control systems.
• The normalized part number 6ES71415AF000BA0 removes hyphens for consistent database indexing and search retrieval.

Parameters are factual source fields retained for model review.

• Review the eight-channel capacity to ensure it meets the digital input requirements of your control logic.
• Verify that the 24 V DC operating voltage aligns with your existing field device power supplies.
• Check the IP67 rating against environmental conditions to confirm adequate protection for your installation site.
• Confirm the M12 connector count matches your cabling strategy and physical space constraints on the rack.
• Assess the physical dimensions and weight for application context with your chosen mounting rail or enclosure setup.

• Inspect images for clear visibility of the four M12 connector ports on the front faceplate.
• Look for labeling that confirms the part number 6ES7141-5AF00-0BA0 printed on the module housing.
• Note the overall form factor to visualize how the unit fits within the ET 200AL system.
• Check for any visible damage or wear indicators if reviewing used or refurbished unit photographs.

• Prepare your project documentation detailing the required number of digital inputs and voltage levels needed.
• Specify the environmental conditions where the module will be installed to justify the IP67 requirement.
• List any specific mounting hardware or rail types required for integrating the unit into your system.
• Include contact information and preferred communication methods for receiving further technical details or clarification.

• Ensure all technical specifications match your system design before submitting the formal inquiry request.
• Cross-reference the active product status with your long-term maintenance and support planning strategies.
• Validate the IP67 rating against your site’s specific exposure to dust, moisture, or washdown procedures.
• Confirm that the 24 V DC input type is application context with your existing sensor network infrastructure.