6ES7141-4BH00-0AA0 Digital Expansion Module Details

Part number

6ES7141-4BH00-0AA0

Brand

Siemens

Category

I/O Modules

Product type

Digital expansion modules

Lifecycle

Active Product

Dimensions

14.00 x 7.3 x 6.5 cm

Net weight

0.172 Kg

Source category

Digital expansion modules

• This component belongs to the SIMATIC DP family of automation devices. It serves as an electronic interface for digital signal processing in industrial environments.
• The module accommodates sixteen distinct digital input points for sensor data collection. Each channel processes twenty-four volt direct current signals for reliable operation.
• Integrated module diagnostics provide continuous feedback on the operational state of the hardware. This feature aids in identifying potential issues within the connected network structure.
• Physical dimensions are recorded as fourteen centimeters in length, seven point three centimeters in width, and six point five centimeters in height. These measurements define the spatial requirements for installation.
• The net weight of the unit is listed as zero point one seven two kilograms. This mass factor is relevant for structural load calculations during mounting procedures.
• The lifecycle status is currently designated as Active Product, indicating ongoing support and relevance for current engineering projects.

• The primary identifier for this unit is the part number 6ES7141-4BH00-0AA0. This code uniquely distinguishes it from other variants in the product line.
• A normalized version of the part number appears as 6ES71414BH000AA0 without separators. This format is often used in database entries and technical documentation references.
• The brand associated with this specific hardware configuration is Siemens. This manufacturer designation confirms the origin and quality standards of the electronic components.
• The product classification falls under the broader category of Digital expansion modules. This grouping helps in organizing similar devices within technical catalogs and inventories.

Parameters are factual source fields retained for model review.

• Input capacity is defined by sixteen discrete digital channels for signal acquisition. Each channel accepts twenty-four volt direct current inputs for standard industrial sensors.
• Diagnostic functionality is embedded directly into the module hardware design. This allows for immediate detection of faults or status changes within the input circuitry.
• The physical footprint requires a space of fourteen by seven point three by six point five centimeters. Engineers must account for these dimensions during panel layout planning.
• Mass specification is recorded at zero point one seven two kilograms per unit. This weight is considered when calculating the total load on mounting rails or structures.
• System integration involves connection to the ET 200 PRO series framework. Proper configuration ensures seamless communication within the distributed I/O network architecture.

• Visual documentation should clearly display the front panel labeling with the part number. High-resolution images aid in verifying the correct model during the review process.
• Side views can illustrate the connector types and pin configurations for interface purposes. These details assist engineers in understanding the physical connection requirements accurately.
• Rear perspectives may show mounting features or DIN rail attachment mechanisms. Such imagery provides context for the installation method and physical securing points.
• Scale references in photographs help convey the actual size relative to standard components. This visual cue supports accurate spatial assessment for enclosure design considerations.

• Review the submitted model number 6ES7141-4BH00-0AA0 against your project specifications. Ensure the sixteen-channel digital input requirement matches your system design needs precisely.
• Verify the twenty-four volt direct current input voltage level application context. Confirm that your field devices operate within this voltage range for proper signal interpretation.
• Check the physical dimensions against your recorded panel or rack space. The fourteen by seven point three by six point five centimeter size must fit your layout constraints.
• Consider the module diagnostics feature for your maintenance and troubleshooting strategy. This capability can streamline fault isolation within your distributed I/O network setup.

• Confirm the active product status aligns with your long-term project timeline. Active status suggests continued manufacturing and technical support review details from the producer.
• Assess the need for the separate connection module IO 6ES7194-4CB50-0AA0. This accessory is required for proper bus connection and must be request independently.
• Evaluate the diagnostic features against your system monitoring requirements. Built-in diagnostics offer advantages for predictive maintenance and rapid fault resolution in automated lines.
• Cross-reference the normalized part number 6ES71414BH000AA0 with internal databases. Using the correct identifier prevents errors during documentation and technical specification reviews.