6ES7136-6AB00-0CA1 SIMATIC DP Fail-Safe Analog Input Module

Part number

6ES7136-6AB00-0CA1

Brand

Siemens

Category

I/O Modules

Product type

Analog F-input modules

Lifecycle

Active Product

Dimensions

7.7 x 6.8 x 2.4 cm

Net weight

0.057 Kg

Source category

Analog F-input modules

• The device supports up to Performance Level E according to ISO 13849 standards for functional safety applications in industrial machinery.
• It achieves Safety Integrity Level 3 compliance under IEC 61508, ensuring robust performance for critical safety-related control loops.
• Physical dimensions are recorded as 7.7 centimeters in width, 6.8 centimeters in depth, and 2.4 centimeters in height for mounting considerations.
• The net weight is listed at 0.057 kilograms, facilitating easy integration into standard rack configurations without excessive load.
• Current lifecycle status is documented as Active Product, indicating ongoing manufacturing support and technical documentation review details for engineers.
• Signal type is specified as analog input, allowing connection to various transducers requiring voltage-based feedback for process control.

• Brand designation is clearly marked as Siemens, identifying the manufacturer responsible for the engineering and production of this component.
• Product classification falls under Analog F-input modules, distinguishing it from digital or standard analog input hardware types.
• The specific series identifier ET 200SP denotes its place within the distributed I/O portfolio for scalable automation systems.
• Functional suffix F indicates fail-safe capabilities, essential for applications where system integrity during fault conditions is paramount.

Parameters are factual source fields retained for model review.

• Channel count is fixed at four, allowing simultaneous acquisition of multiple analog process variables within a single module slot.
• Input range covers universal voltage signals, typically centered around the 0 to 10 volt specification for standard sensors.
• High frequency designation suggests optimized signal processing speeds, reducing latency between physical measurement and digital interpretation.
• Safety ratings include both PL E and SIL 3, providing comprehensive verification for regulatory compliance in hazardous areas.

• Visual inspection should confirm the presence of the full part number label on the front face of the unit.
• Check for any physical damage to the connector pins, ensuring they are straight and free from corrosion or debris.
• Verify the LED indicators are intact, as they provide visual status feedback for power and channel activity during operation.
• Ensure the housing shows no signs of cracking or warping, which could compromise the sealing and mechanical stability.

• Gather all relevant project documents specifying the required safety integrity level and performance level for the target application.
• Confirm the voltage range of connected sensors matches the 0 to 10 volt input capability of this specific module.
• Review the rack configuration to ensure sufficient space for the module dimensions and proper heat dissipation pathways.
• Prepare technical questions regarding firmware updates or diagnostic features if your system relies on advanced communication protocols.

• Cross-reference the submitted part number with documented Siemens documentation to verify all technical specifications match your requirements.
• Evaluate the environmental conditions of the installation site to ensure the module can operate within its rated parameters.
• Assess the integration complexity with existing PLC systems to determine necessary programming adjustments for analog signal handling.
• Document any specific compliance standards required by your industry to ensure this active product meets all regulatory obligations.