Siemens 6ES7134-6PA21-0BU0 Analog Input Module Inquiry

Part number

6ES7134-6PA21-0BU0

Brand

Siemens

Category

I/O Modules

Product type

Analog input modules

Lifecycle

Active Product

Dimensions

7.7 x 6.5 x 2.3 cm

Net weight

0.043 Kg

Source category

Analog input modules

• The module operates within the SIMATIC ET 200SP system architecture for distributed I/O applications. Keep dimensions 7.7 x 6.5 x 2.3 cm and net weight 0.043 Kg unchanged while comparing project documents and product image evidence.
• It is classified specifically as an analog input module for energy metering purposes.
• The device supports AI Energy Meter RC ST functionality for specialized measurement needs.
• Input signals can be derived from Rogowski coils for flexible installation scenarios.
• Current and voltage transformers providing 333 mV outputs are supported by this unit.
• Integrated channel diagnostics allow for monitoring the status of individual input channels.

• The part number 6ES7134-6PA21-0BU0 serves as the primary identifier for this component. Use the source path Automation technology / SIMATIC ET 200SP / I/O modules / Analog input modules to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• The normalized part number 6ES71346PA210BU0 is used for consistent database indexing and retrieval.
• Siemens is the recorded brand name associated with this industrial automation hardware.
• The product lifecycle status is listed as Active Product for ongoing project planning.

Parameters are factual source fields retained for model review.

• Physical dimensions are recorded as 7.7 cm in length, 6.5 cm in width, and 2.3 cm in height. Check product-owned images, label text, connector area, and submitted model references against the exact 6ES7134-6PA21-0BU0 record before publication.
• The net weight of the module is specified as 0.043 kilograms for logistics calculations.
• The category slug io-modules places this item within broader industrial control classifications.
• Source parameters indicate the product class field is empty in the current record.
• Technical specifications focus on the analog input capabilities and diagnostic features provided.

• Visual documentation should display the front panel with clear labeling of the part number. Review Siemens 6ES7134-6PA21-0BU0 as Analog input modules with source category Analog input modules, recorded lifecycle Active Product, and submitted model identity.
• Side views may illustrate the compact form factor defined by the stated dimensions.
• Connector details should be visible to confirm application context with standard ET 200SP backplanes.
• Labeling must clearly show the Siemens branding and specific model identification codes.

• Review the submitted model against your project requirements for analog signal acquisition.
• Verify that Rogowski coil or 333 mV transformer inputs match your sensor setup.
• Check the physical dimensions to ensure fit within your existing control cabinet space.
• Confirm the active product status aligns with your long-term maintenance strategy needs.

• Ensure all technical parameters are cross-referenced with documented Siemens documentation before submission.
• Dimensional data should be validated against mechanical constraints in your installation environment.
• Signal type verification is critical to ensure proper interfacing with your sensors.
• Project document review should include both electrical and physical specification assessments.