Siemens 6AV7674-1LA61-0AA0 Extension Unit Details

Part number

6AV7674-1LA61-0AA0

Brand

Siemens

Category

HMI Panels

Product type

Extension Units and operator controls

Lifecycle

Active Product

Dimensions

55.00 x 11.6 x 11.6 cm

Net weight

2.744 Kg

Source category

Extension Units and operator controls

• Physical dimensions are listed as 55.00 x 11.6 x 11.6 cm for the extension unit housing structure. Keep dimensions 55.00 x 11.6 x 11.6 cm and net weight 2.744 Kg unchanged while comparing project documents and product image evidence.
• The net weight of the component is recorded at 2.744 Kg for logistical planning purposes.
• Twelve distinct mounting positions are provided to accommodate various operator control configurations flexibly.
• The design supports up to eight operator controls plus one emergency stop button installation.
• Connection is established via a hardwired method without requiring additional equipment for basic operation.
• The unit is categorized under extension units and operator controls within the protected devices segment.

• The part number 6AV7674-1LA61-0AA0 identifies this specific 22-inch hardwired extension unit model. Use the source path PROtected devices and system components / Extension Units and operator controls to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• Normalized part number 6AV76741LA610AA0 is used for consistent database indexing and reference tracking.
• Lifecycle status is currently listed as Active Product indicating ongoing manufacturing or support review details.
• Brand attribution is confirmed as Siemens for this industrial automation hardware component specification.

Parameters are factual source fields retained for model review.

• Review the submitted model against project requirements for fully IP65-enclosed 16:9 HMI device mounting. Check product-owned images, label text, connector area, and submitted model references against the exact 6AV7674-1LA61-0AA0 record before publication.
• Verify that the hardwired connection method aligns with the electrical infrastructure of the target system.
• Check the maximum capacity of twelve mounting positions against the planned operator control layout.
• Confirm the physical dimensions fit within the designated space on the existing IPC or HMI frame.
• Assess the net weight of 2.744 Kg for structural support requirements during installation procedures.

• Inspect the visual representation of the 22-inch panel to confirm aspect ratio specifications.
• Note the mounting hole patterns visible in the source images for alignment verification steps.
• Observe the connector types depicted to ensure they match the hardwired connection requirement details.
• Review the overall enclosure design shown to assess application context with IP65 environmental protection standards.

• Prepare project documentation specifying the exact HMI/IPC models intended for this extension unit integration.
• List the required operator controls and emergency stop buttons to utilize the twelve mounting positions.
• Define the hardwiring specifications needed for the connection between the extension unit and host device.
• Include dimensional constraints and weight limits in the inquiry to ensure proper mechanical support planning.

• Ensure all technical parameters match the source data before finalizing the inquiry submission process.
• Cross-reference the part number with internal records to verify correct model identification accuracy.
• Confirm that the inquiry includes all necessary installation details for accurate technical assessment results.
• Review the lifecycle status to understand the current standing of the product specification details.