Siemens 6AV2185-8FE08-0AA0 Extension Unit Details

Part number

6AV2185-8FE08-0AA0

Brand

Siemens

Category

HMI Panels

Product type

Extension Units and operator controls

Lifecycle

Active Product

Dimensions

56.2 x 16.4 x 12.6 cm

Net weight

3.028 Kg

Source category

Extension Units and operator controls

• Display size is recorded as 22 inches, providing ample visual space for complex interface layouts. Keep dimensions 56.2 x 16.4 x 12.6 cm and net weight 3.028 Kg unchanged while comparing project documents and product image evidence.
• Aspect ratio is listed as 16:9, aligning with standard widescreen configuration requirements for operators.
• Connection method utilizes PROFINET protocol for high-speed communication within industrial network environments.
• Enclosure rating targets full IP65 protection when mounted on application context fully enclosed HMI devices.
• Physical dimensions measure 56.2 cm in width, 16.4 cm in height, and 12.6 cm in depth.
• Net weight is documented at 3.028 kg, indicating a substantial build for industrial durability standards.

• Brand designation is clearly identified as Siemens within the industrial automation component sector. Use the source path PROtected devices and system components / Extension Units and operator controls to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• Product classification falls under Extension Units and operator controls for system expansion purposes.
• Lifecycle status is recorded as Active Product, confirming current production and support review details.
• Source categorization places this item under Protected devices and system components for safety contexts.

Parameters are factual source fields retained for model review.

• Width dimension is specified as 56.2 centimeters for spatial planning during installation phases. Check product-owned images, label text, connector area, and submitted model references against the exact 6AV2185-8FE08-0AA0 record before publication.
• Height measurement is noted at 16.4 centimeters, influencing vertical mounting space calculations.
• Depth specification stands at 12.6 centimeters, relevant for cabinet depth and clearance checks.
• Mass parameter is fixed at 3.028 kilograms, affecting structural load requirements for mounts.
• Interface type relies on PROFINET, requiring application context network infrastructure for successful operation.

• Visual documentation should highlight the 22-inch screen area for size reference verification. Review Siemens 6AV2185-8FE08-0AA0 as Extension Units and operator controls with source category Extension Units and operator controls, recorded lifecycle Active Product, and submitted model identity.
• Mounting points must be visible to confirm application context with fully enclosed HMI frames.
• Connector ports need clear depiction to assist in PROFINET cable routing assessments.
• Labeling details should be legible to ensure accurate model number confirmation during review.

• Verify that the target HMI device supports 16:9 aspect ratios for proper fitment.
• Confirm PROFINET network infrastructure is present and configured for the extension unit connection.
• Check physical space constraints against the 56.2 x 16.4 x 12.6 cm dimensions.
• Ensure mounting surfaces can support the 3.028 kg net weight without additional reinforcement.

• Cross-reference the part number 6AV2185-8FE08-0AA0 with internal project documentation for accuracy.
• Validate that the IP65 enclosure requirement matches the environmental conditions of the installation site.
• Review PROFINET application context with existing PLCs and network switches before finalizing submission.
• Confirm that the active product lifecycle status meets long-term maintenance expectations for the project.