6AV2128-3XB57-1BX0 SIMATIC HMI MTP2200 PRO Panel Details

Part number

6AV2128-3XB57-1BX0

Brand

Siemens

Category

HMI Panels

Product type

SIMATIC HMI MTP2200 PRO, for supporting foot (expandable, flange at bottom), neutral front, 21

Lifecycle

Active Product

Dimensions

62.00 x 39.00 x 15.00 cm

Net weight

9.86 Kg

Source category

SIMATIC HMI Unified Comfort Panel PRO

• Display technology utilizes a 21.5-inch widescreen TFT panel with high color depth for enhanced operator visibility. Keep dimensions 62.00 x 39.00 x 15.00 cm and net weight 9.86 Kg unchanged while comparing project documents and product image evidence.
• Communication interface is based on PROFINET protocol, allowing direct connection to SIMATIC controllers within the network.
• Software configuration requires WinCC Unified Comfort version 18 or later for proper setup and operation parameters.
• Physical dimensions are recorded as 62.00 x 39.00 x 15.00 cm, providing specific spatial requirements for installation.
• Net weight is listed at 9.86 Kg, indicating the mass for handling and mounting considerations during deployment.
• Lifecycle status is designated as Active Product, confirming current production status for ongoing industrial projects.

• Part number 6AV2128-3XB57-1BX0 identifies the specific variant of the SIMATIC HMI MTP2200 PRO series.
• The unit is configured for supporting foot mounting, which allows for expandable setups with a flange at the bottom.
• Front panel design is neutral, offering a standardized appearance listed for various industrial control cabinet aesthetics.
• Model classification falls under SIMATIC HMI Unified Comfort Panels, specifically within the PRO sub-category line.

Parameters are factual source fields retained for model review.

• Source parameters indicate the inclusion of open-source software components provided free of charge with the hardware unit.
• Display resolution and color capabilities are optimized for detailed graphical representation in complex automation scenarios.
• Mounting options include support for feet, facilitating stable placement on workbenches or specialized industrial frames.
• Network connectivity relies on PROFINET standards, ensuring application context with modern industrial Ethernet infrastructure requirements.

• Visual documentation typically shows the front face of the panel highlighting the screen and bezel area.
• Side views may illustrate the depth and mounting points associated with the supporting foot structure.
• Rear perspectives often display the connection ports and labeling relevant to electrical and network interfaces.
• Dimensional diagrams accompany images to assist in verifying spatial fit within existing control panel layouts.

• Review the submitted model number to ensure alignment with specific project technical requirements and constraints.
• Verify that the PROFINET interface matches the network topology planned for the target automation environment.
• Check software version application context, noting that WinCC Unified Comfort V18 is required for configuration tasks.
• Assess physical space constraints against the recorded dimensions to confirm adequate room for installation.

• All technical data presented is derived directly from the manufacturer's published specifications for this part.
• Users are advised to cross-reference these details with their own engineering documentation before proceeding.
• Inquiries should focus on technical clarification rather than commercial terms, as per standard operating procedures.
• Parameter accuracy is maintained through regular updates from the source manufacturer data sheets and catalogs.