6AV2128-3MB27-0BX0 SIMATIC HMI MTP1200 PRO Panel Details

Part number

6AV2128-3MB27-0BX0

Brand

Siemens

Category

HMI Panels

Product type

SIMATIC HMI MTP1200 PRO for support arm (expandable, round pipe) and Extension Unit, 12

Lifecycle

Active Product

Dimensions

39.9 x 30.4 x 13.1 cm

Net weight

6.037 Kg

Source category

SIMATIC HMI Unified Comfort Panel PRO

• The device features a 12.1-inch widescreen TFT display technology for clear visualization. Keep dimensions 39.9 x 30.4 x 13.1 cm and net weight 6.037 Kg unchanged while comparing project documents and product image evidence.
• Color reproduction capabilities reach up to sixteen million distinct color variations for accuracy.
• Connectivity is established through a dedicated PROFINET interface for network communication.
• Configuration requirements begin with WinCC Unified Comfort version eighteen or later software.
• Physical dimensions are recorded at thirty-nine point nine by thirty point four centimeters.
• The net weight of the unit is listed as six point zero three seven kilograms.

• Part number 6AV2128-3MB27-0BX0 identifies this specific Unified Comfort Panel PRO variant. Use the source path SIMATIC HMI Unified Comfort Panels / SIMATIC HMI Unified Comfort Panel PRO to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• The product type specifies inclusion for support arm and extension unit applications.
• Lifecycle status is currently active within the manufacturer's current product portfolio records.
• Brand attribution is confirmed as Siemens within the industrial automation hardware sector.

Parameters are factual source fields retained for model review.

• Display size is fixed at twelve point one inches for optimal viewing angles. Check product-owned images, label text, connector area, and submitted model references against the exact 6AV2128-3MB27-0BX0 record before publication.
• TFT technology ensures consistent brightness and contrast ratios across the screen area.
• PROFINET interface supports real-time data exchange with PLCs and other network devices.
• Software dependency requires WinCC Unified Comfort V18 for initial configuration and setup.
• Open-source software components are included and provided without additional licensing charges.

• Visual documentation should highlight the front panel interface and button layout clearly. Review Siemens 6AV2128-3MB27-0BX0 as hmi panels with source category SIMATIC HMI Unified Comfort Panel PRO, recorded lifecycle Active Product, and submitted model identity.
• Side views may illustrate the mounting points for the expandable round pipe.
• Rear connections need visibility to confirm PROFINET port placement and cable routing.
• Dimensional diagrams assist in verifying spatial requirements for the support arm assembly.

• Verify that the target environment supports PROFINET communication protocols for integration. Keep dimensions 39.9 x 30.4 x 13.1 cm and net weight 6.037 Kg unchanged while comparing project documents and product image evidence.
• Confirm that WinCC Unified Comfort V18 is installed for proper configuration steps.
• Check physical space constraints against the recorded dimensions of thirty-nine point nine centimeters.
• Assess power supply requirements and environmental conditions for the installation location.

• Ensure all project documentation references the exact part number for accuracy.
• Cross-reference the software version requirements before initiating any configuration procedures.
• Validate mechanical mounting solutions align with the specified support arm design.
• Review technical datasheets for detailed electrical specifications and interface pinouts.