Siemens 6AG2522-1BH01-4AB0 Digital Output Module Details

Part number

6AG2522-1BH01-4AB0

Brand

Siemens

Category

I/O Modules

Product type

I/O Modules

Lifecycle

Active Product

Dimensions

6.5 x 9.2 x 3.8 cm

Net weight

0.276 Kg

Source category

SIPLUS extreme RAIL digital output modules

• Operating temperature range extends from minus forty degrees Celsius to plus seventy degrees Celsius. Keep dimensions 6.5 x 9.2 x 3.8 cm and net weight 0.276 Kg unchanged while comparing project documents and product image evidence.
• Overtemperature class OT4 applies with ST1/2 rating allowing eighty-five degrees Celsius for ten minutes.
• Single-channel diagnostics are integrated to monitor individual output states and detect faults promptly.
• Conformal coating protects internal circuitry from moisture, dust, and corrosive agents in severe conditions.
• Net weight is recorded at zero point two seven six kilograms for handling and mounting calculations.
• Physical dimensions measure six point five by nine point two by three point eight centimeters.

• Brand designation is clearly marked as Siemens within the product classification system. Use the source path SIPLUS extreme RAIL digital modules / SIPLUS extreme RAIL digital output modules to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• Lifecycle status is listed as Active Product indicating ongoing manufacturing and support review details.
• Product class B indicates review restrictions requiring direct contact with designated Siemens review contacts.
• Source category path identifies this unit under SIPLUS extreme RAIL digital output modules.

Parameters are factual source fields retained for model review.

• Channel count is fixed at sixteen digital outputs distributed across two distinct groups. Check product-owned images, label text, connector area, and submitted model references against the exact 6AG2522-1BH01-4AB0 record before publication.
• Current capacity per group is specified as four amperes maximum for load connection.
• Diagnostics feature enables single-channel monitoring rather than group-level fault detection only.
• Environmental rating includes specific overtemperature classes for thermal stress management in operations.
• Mounting type is rail-based, consistent with standard industrial automation panel installation practices.

• Visual inspection should confirm the presence of conformal coating on the module surface. Review Siemens 6AG2522-1BH01-4AB0 as I/O Modules with source category SIPLUS extreme RAIL digital output modules, recorded lifecycle Active Product, and submitted model identity.
• Label readability must be verified to ensure part number matches 6AG2522-1BH01-4AB0 exactly.
• Connector pins should be examined for straightness and absence of physical deformation damage.
• Housing integrity needs assessment to check for cracks or signs of prior stress.

• Review project documentation to confirm voltage levels match the twenty-four volt DC specification.
• Verify spatial constraints in control panels against the recorded physical dimensions of the unit.
• Check thermal environment requirements to ensure operation stays within the specified temperature range.
• Prepare technical questions regarding the Class B review restriction process before submission.

• Confirm that the substitute value nature of the base model is understood correctly.
• Ensure all technical parameters align with the specific demands of the target application.
• Document any special handling requirements due to the sensitive electronic components inside.
• Validate that the inquiry form captures all necessary details for accurate processing.