Inquiry for Siemens 6AG2512-1DK01-4AB0 Central Processing Unit

Part number

6AG2512-1DK01-4AB0

Brand

Siemens

Category

Cables, Connectors & Accessories

Product type

Cables, Connectors & Accessories

Lifecycle

Prod. Cancellation

Dimensions

12.2 x 10.00 x 6.3 cm

Net weight

0.558 Kg

• Central processing unit features 200 KB work memory allocated specifically for program storage requirements. Keep dimensions 12.2 x 10.00 x 6.3 cm and net weight 0.558 Kg unchanged while comparing project documents and product image evidence.
• Data memory capacity is recorded at 1 MB, supporting extensive data handling operations.
• First interface utilizes PROFINET IRT technology equipped with a built-in three-port switch.
• Bit performance is specified at 48 nanoseconds, ensuring rapid processing cycles for control tasks.
• A SIMATIC Memory Card is required for operation, as internal storage is limited.
• Overload tolerance allows operation at +85 degrees Celsius for up to ten minutes duration.

• Part number 6AG2512-1DK01-4AB0 identifies the SIPLUS variant based on the 6ES7512-1DK01-0AB0 model. Use the source path cables-connectors-accessories to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• The prefix SIPLUS indicates specialized environmental hardening compared to standard SIMATIC S7-1500 components.
• Rail-based design facilitates integration into standard DIN rail mounting systems for automation racks.
• Conformal coating application distinguishes this unit from uncoated counterparts in similar product families.

Parameters are factual source fields retained for model review.

• Physical dimensions are listed as 12.2 cm by 10.00 cm by 6.3 cm for spatial planning. Check product-owned images, label text, connector area, and submitted model references against the exact 6AG2512-1DK01-4AB0 record before publication.
• Net weight is recorded at 0.558 Kg, aiding in logistics and rack load calculations.
• Lifecycle status is currently Prod. Cancellation, requiring careful consideration for new installations.
• Product class B indicates review restrictions, necessitating direct contact with designated Siemens channels.

• Visual inspection should confirm the presence of the Siemens branding and model label clearly. Review Siemens 6AG2512-1DK01-4AB0 as Cables, Connectors & Accessories with source category cables-connectors-accessories, recorded lifecycle Prod. Cancellation, and submitted model identity.
• Check for any visible damage to the housing that might compromise the conformal coating integrity.
• Verify connector pins and ports for cleanliness and absence of physical deformation or corrosion.
• Ensure labels match the part number 6AG2512-1DK01-4AB0 to avoid confusion with similar units.

• Prepare project documentation specifying the required operating temperature range and environmental exposure levels. Keep dimensions 12.2 x 10.00 x 6.3 cm and net weight 0.558 Kg unchanged while comparing project documents and product image evidence.
• Confirm whether existing infrastructure supports PROFINET IRT with a three-port switch topology.
• Verify review details of SIMATIC Memory Cards application context with the S7-1500 CPU family requirements.
• Review review note constraints associated with Product Class B before finalizing submission details.

• Source parameter review is essential to ensure alignment with specific engineering project requirements.
• Project document review should address the implications of the Prod. Cancellation lifecycle status.
• Technical evaluation must consider the necessity of conformal coating for the intended deployment site.
• Submission guidelines require adherence to Product Class B restrictions regarding review and exchanges.