6AG2155-5AA00-1AC0 SIPLUS ET 200MP Interface Module

Part number

6AG2155-5AA00-1AC0

Brand

Siemens

Category

I/O Modules

Product type

I/O Modules

Lifecycle

Active Product

Dimensions

15.4 x 14.9 x 4.3 cm

Net weight

0.356 Kg

Source category

SIPLUS ET 200MP IM 155-5 PN ST TX RAIL

• Conformal coating protects internal components against moisture, dust, and corrosive gases in extreme industrial settings.
• Operating temperature range spans from minus forty degrees Celsius to plus sixty degrees Celsius for broad environmental adaptability.
• Overtemperature class OT1 allows operation up to ST1/2 with a peak tolerance of seventy degrees Celsius for ten minutes.
• Integrated two-port switch enables RJ45 shared device connections with support for Media Redundancy Protocol for network resilience.
• Isochronous mode firmware updates ensure precise synchronization capabilities for high-performance motion control applications in automated lines.
• Prioritized run-up functionality optimizes startup sequences, reducing downtime and ensuring reliable initialization during system boot processes.

• Base model reference is 6ES7155-5AA00-0AC0, modified specifically for SIPLUS extreme durability and environmental resistance standards.
• Product classification indicates active lifecycle status, meaning the item remains in current production and specification support.
• review restriction class B applies, requiring direct contact with designated Siemens review contacts for any review procedures.
• Module type is identified as IM155-5 PN ST TX RAIL, denoting its specific protocol and physical rail mounting style.

Parameters are factual source fields retained for model review.

• Physical dimensions are recorded at fifteen point four by fourteen point nine by four point three centimeters for space planning.
• Net weight is listed as zero point three five six kilograms, aiding in logistical handling and rack load calculations.
• PROFINET IO device interface supports advanced diagnostics and configuration tools for seamless integration into existing automation architectures.
• Supports IM0 through IM3 module slots, allowing flexible expansion configurations depending on specific input and output requirements.
• Network performance includes isochronous mode support with latency thresholds greater than or equal to zero point two five milliseconds.

• Visual inspection should confirm the presence of conformal coating on the circuit board for environmental protection verification.
• Check port labeling to ensure correct identification of the two integrated RJ45 switches for network cabling planning.
• Verify rail mounting clips are intact and undamaged to ensure secure installation within the ET 200MP system frame.
• Review label clarity for part number 6AG2155-5AA00-1AC0 to prevent misidentification during inventory or inquiry preparation documentation processes.

• Document the specific environmental conditions, including temperature extremes and exposure to chemicals, to validate module suitability.
• List the required number of I/O modules and confirm whether an additional power supply unit is necessary.
• Specify network topology requirements, particularly if Media Redundancy Protocol or isochronous mode synchronization is needed for the application.
• Prepare project documentation detailing the base controller type and existing PROFINET infrastructure for comprehensive technical review.

• Confirm that the requested quantity aligns with the review restriction class B guidelines for proper handling procedures.
• Ensure all technical parameters match the project specifications before finalizing the inquiry submission for accurate processing.
• Verify that the network switch configuration meets the bandwidth and redundancy requirements of the target industrial application.
• Cross-reference the operating temperature limits with the actual site conditions to documented reliable long-term module performance.