Siemens 6AG2134-6PA20-4BD0 Analog Input Module Details

Part number

6AG2134-6PA20-4BD0

Brand

Siemens

Category

I/O Modules

Product type

I/O Modules

Lifecycle

Active Product

Dimensions

7.7 x 6.5 x 2.3 cm

Net weight

0.056 Kg

Source category

SIPLUS extreme RAIL analog inputs

• Operating temperature range spans from -40°C to +70°C for reliable performance in varied climates. Keep dimensions 7.7 x 6.5 x 2.3 cm and net weight 0.056 Kg unchanged while comparing project documents and product image evidence.
• Overtemperature class OT4 allows operation up to +85°C for ten-minute intervals without damage.
• Conformal coating protects internal components from moisture, dust, and corrosive industrial atmospheres effectively.
• Rail-based installation ensures secure mounting within the SIPLUS extreme RAIL analog input system structure.
• Channel diagnostics provide detailed feedback on input signal integrity and potential hardware faults immediately.
• Net weight of 0.056 kg facilitates easy handling and integration into existing automation rack setups.

• Part number 6AG2134-6PA20-4BD0 identifies the specific variant with extended environmental ratings and coating. Use the source path Automation technology / SIPLUS I/O modules / SIPLUS extreme RAIL analog inputs to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• Base model reference 6ES7134-6PA20-0BD0 indicates the standard version without the extreme environmental modifications.
• SIPLUS designation confirms compliance with Siemens standards for industrial automation in severe operating zones.
• ET 200SP series classification denotes distributed I/O capability with high density and flexibility.

Parameters are factual source fields retained for model review.

• Physical dimensions measure 7.7 cm in width, 6.5 cm in height, and 2.3 cm in depth.
• Voltage rating of 480VAC specifies the maximum alternating current voltage for connected energy metering loads.
• Analog input function type requires review of signal types supported by the internal conversion circuitry.
• Lifecycle status listed as Active Product indicates ongoing manufacturing and support review details through channels.
• Product class B notes indicate restricted review notes requiring direct contact with Siemens review contacts.

• Visual inspection should confirm the presence of conformal coating on the printed circuit board surface.
• Label clarity must be verified to ensure the part number matches 6AG2134-6PA20-4BD0 exactly.
• Connector pins should be checked for straightness and absence of corrosion or physical damage.
• Mounting rail clips must be intact to ensure secure attachment during vibration-prone operations.

• Verify project environmental conditions match the -40°C to +70°C operating range specified for this unit.
• Confirm that the 480VAC energy metering application aligns with the module's electrical input specifications.
• Check if channel diagnostics integration is required for your specific SCADA or PLC monitoring setup.
• Prepare technical documents detailing any special mounting or wiring constraints for the ET 200SP rack.

• Ensure all technical parameters are cross-referenced with your system design documentation before submission.
• Contact your designated Siemens review contacts for specific inquiry preparation guidance regarding product class B restrictions.
• Review the source category path to confirm alignment with your specific automation technology requirements.
• Maintain accurate records of the part number 6AG2134-6PA20-4BD0 for all future correspondence and tracking.