Inquiry for Siemens 6AG1322-5FF00-4AB0 Digital Output Module

Part number

6AG1322-5FF00-4AB0

Brand

Siemens

Category

I/O Modules

Product type

I/O Modules

Lifecycle

Prod. Cancellation

Dimensions

13.00 x 15.00 x 15.00 cm

Net weight

0.33 Kg

• Eight digital output channels provide reliable switching capabilities for industrial control applications. Keep dimensions 13.00 x 15.00 x 15.00 cm and net weight 0.33 Kg unchanged while comparing project documents and product image evidence.
• Operating voltage supports both 120 V AC and 230 V AC power standards.
• Each output channel delivers a maximum current capacity of two amperes for load connection.
• Conformal coating ensures protection against humidity, dust, and corrosive atmospheric conditions.
• Operational temperature range extends from zero degrees Celsius up to sixty degrees Celsius.
• Single-point grounding per channel helps manage electrical noise and ensure signal integrity.

• Base model reference links to 6ES7322-5FF00-0AB0 with specific SIPLUS enhancements applied. Use the source path io-modules to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• Product classification indicates production cancellation status requiring careful project lifecycle assessment.
• review restriction class B suggests contacting designated Siemens review contacts for handling procedures.
• Module type identifies as a digital output module within the S7-300 family structure.

Parameters are factual source fields retained for model review.

• Physical dimensions measure approximately thirteen centimeters wide by fifteen centimeters deep and high. Check product-owned images, label text, connector area, and submitted model references against the exact 6AG1322-5FF00-4AB0 record before publication.
• Net weight records at zero point three three kilograms for transport and mounting calculations.
• Connector interface utilizes a forty-pole configuration for secure electrical connection to backplane.
• Isolation design separates output circuits from internal logic to prevent interference propagation.
• Failure mode selection allows customization of output behavior during diagnostic or error states.

• Visual inspection should confirm presence of conformal coating on exposed circuit board areas. Review Siemens 6AG1322-5FF00-4AB0 as I/O Modules with source category io-modules, recorded lifecycle Prod. Cancellation, and submitted model identity.
• Labeling must clearly display the full part number for accurate inventory identification.
• Terminal blocks should appear intact without signs of corrosion or physical damage.
• Mounting rails and clip mechanisms need verification for proper rack installation application context.

• Verify project requirements against the specified sixty-degree Celsius maximum operating temperature limit. Keep dimensions 13.00 x 15.00 x 15.00 cm and net weight 0.33 Kg unchanged while comparing project documents and product image evidence.
• Confirm power supply specifications match the twelve-zero or two-three-zero volt AC options.
• Review grounding strategy to ensure single-point grounding per channel aligns with system design.
• Check lifecycle status implications for long-term maintenance and spare part planning strategies.

• Lifecycle status indicates production cancellation which may affect future sourcing and support options.
• review restriction class B necessitates direct communication with documented Siemens contact points.
• Environmental rating confirms suitability for demanding industrial settings with elevated temperature conditions.
• Technical parameters should be cross-referenced with specific application requirements before submission.