Siemens 6AG1242-6TM10-2BB1 SIPLUS ET 200SP ECC Module

Part number

6AG1242-6TM10-2BB1

Brand

Siemens

Category

I/O Modules

Product type

I/O Modules

Lifecycle

Active Product

Dimensions

7.7 x 6.8 x 3.00 cm

Net weight

0.045 Kg

Source category

SIPLUS ET 200SP ECC charging controllers

• Dual Pulse Width Modulation outputs facilitate independent control channels for connected charging stations. Keep dimensions 7.7 x 6.8 x 3.00 cm and net weight 0.045 Kg unchanged while comparing project documents and product image evidence.
• Conformal coating provides additional protection against moisture, dust, and corrosive agents in industrial settings.
• Operating temperature range spans from -30°C to +60°C for consistent performance in extreme climates.
• Supports load control for conductive charging systems compliant with IEC61851 standards for safety.
• Features two Control Pilot signals for communication between the vehicle and the charging equipment.
• Includes two plug presence detection inputs to verify secure connection before initiating power transfer.

• Base model reference is 6FE1242-6TM10-0BB1, adapted for specific SIPLUS environmental requirements. Use the source path Automation technology / SIPLUS technology modules / SIPLUS ET 200SP ECC charging controllers to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• Product classification indicates review restrictions requiring direct contact with designated Siemens review contacts.
• Lifecycle status is recorded as Active Product, ensuring ongoing support and documentation review details.
• Category placement falls under Automation Technology and SIPLUS Technology Modules for organizational clarity.

Parameters are factual source fields retained for model review.

• Physical dimensions are recorded at 7.7 x 6.8 x 3.00 cm for compact integration. Check product-owned images, label text, connector area, and submitted model references against the exact 6AG1242-6TM10-2BB1 record before publication.
• Net weight is listed as 0.045 Kg, facilitating easy handling during installation procedures.
• Two digital switching contacts function as open collectors for load contactor control signals.
• Two digital inputs monitor feedback from load contactors or connector lock mechanisms.
• Module supports two distinct charging outlets for simultaneous or sequential vehicle charging operations.

• Visual inspection should confirm the presence of conformal coating on internal circuit components. Review Siemens 6AG1242-6TM10-2BB1 as I/O Modules with source category SIPLUS ET 200SP ECC charging controllers, recorded lifecycle Active Product, and submitted model identity.
• Labeling must clearly display the full part number 6AG1242-6TM10-2BB1 for verification purposes.
• Connector pins should be examined for integrity and absence of physical damage or corrosion.
• Overall housing condition must reflect standard industrial grade materials listed for heavy usage.

• Verify project requirements for extended temperature operation within the specified -30 to +60 degree range.
• Confirm need for IEC61851 compliance in the intended electric vehicle charging application design.
• Assess space constraints against the recorded dimensions of 7.7 x 6.8 x 3.00 cm.
• Prepare technical documentation detailing specific load control and feedback signal integration needs.

• Source parameter review confirms alignment with stated technical specifications for this module type.
• Model identification notes indicate specific handling requirements due to review restriction classifications.
• Technical summary highlights key features relevant to conductive charging and environmental resilience.
• Inquiry preparation steps ensure all necessary project details are captured before submission.