Siemens 6AG1226-6RA32-5XB0 SIPLUS Fail-Safe Digital Output Module

Part number

6AG1226-6RA32-5XB0

Brand

Siemens

Category

I/O Modules

Product type

I/O Modules

Lifecycle

Active Product

Dimensions

10.8 x 8.5 x 8.7 cm

Net weight

0.345 Kg

Source category

SIPLUS SM 1226 fail-safe relay output

• The module provides two fail-safe digital outputs utilizing relay technology for reliable switching capabilities. Keep dimensions 10.8 x 8.5 x 8.7 cm and net weight 0.345 Kg unchanged while comparing project documents and product image evidence.
• It operates within a temperature range of -25°C to +55°C, ensuring stability in varied climates.
• Conformal coating is applied to the internal components to protect against moisture, dust, and corrosive agents.
• The device supports PROFIsafe protocol, enabling safe communication over standard PROFINET infrastructure networks.
• Physical dimensions are recorded at 10.8 x 8.5 x 8.7 cm, fitting standard DIN rail mounting configurations.
• The net weight is listed as 0.345 Kg, contributing to manageable handling during installation procedures.

• The part number 6AG1226-6RA32-5XB0 identifies this specific variant within the broader SIPLUS catalog structure. Use the source path SIPLUS Fail-safe digital inputs and outputs / SIPLUS SM 1226 fail-safe relay output to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• It is based on the underlying hardware platform of the 6ES7226-6RA32-0XB0 module design.
• The SIPLUS designation indicates enhanced environmental ratings compared to standard industrial automation components.
• The suffix 5XB0 distinguishes this fail-safe relay output version from other digital output types.

Parameters are factual source fields retained for model review.

• Review the maximum load current capacity of 5A per relay channel for circuit planning purposes.
• Verify the safety integrity level requirements, noting support for up to PL e per ISO 13849-1.
• Check SIL3 compliance according to IEC 61508 standards for functional safety application alignment.
• Confirm the 70 mm width requirement for the designated slot allocation in the controller rack.
• Assess the electrical isolation characteristics between the process side and the backplane bus interface.

• Inspect the front label for clear printing of the full Siemens part number and batch code.
• Examine the terminal block area for any signs of physical damage or corrosion on contacts.
• Check the housing integrity for cracks or deformations that might compromise the conformal coating seal.
• Verify the presence of the PROFIsafe address configuration switches or dip settings on the module face.

• Gather project documentation specifying the required safety performance levels and environmental operating conditions.
• Prepare a list of existing S7-1200 CPU models to ensure mechanical and electrical interface alignment.
• Document the specific PROFIsafe function blocks and safety parameters needed for the control logic.
• Compile technical drawings showing the intended mounting location and recorded space within the control cabinet.

• Ensure all safety-related parameters match the specific hazard analysis results for the target application.
• Cross-reference the firmware version requirements with the connected S7-1200 CPU software configuration details.
• Validate that the power supply specifications meet the voltage and current demands of the relay loads.
• Confirm that the installation environment does not exceed the specified temperature and humidity limits.