Siemens 6AG1195-7HB00-7XA0 Active Bus Module Specification Review

Part number

6AG1195-7HB00-7XA0

Brand

Siemens

Category

I/O Modules

Product type

I/O Modules

Lifecycle

Prod. Cancellation

Dimensions

10.00 x 10.00 x 6.5 cm

Net weight

0.135 Kg

• This module is based on the reference design 6ES7195-7HB00-0XA0 with specific enhancements. Keep dimensions 10.00 x 10.00 x 6.5 cm and net weight 0.135 Kg unchanged while comparing project documents and product image evidence.
• Conformal coating is applied to ensure protection against moisture and corrosive agents.
• Operating temperature range extends from -40°C to +70°C for extreme environments.
• Startup capability is maintained at temperatures as low as -25°C reliably.
• The unit accommodates two IM 153-2 Red modules for redundancy configurations.
• Removal and insertion functions are supported during RUN operating time effectively.

• Identify the part number 6AG1195-7HB00-7XA0 clearly on the device label. Use the source path io-modules to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• Verify the SIPLUS ET 200M branding associated with the active bus module.
• Check for the base reference 6ES7195-7HB00-0XA0 in technical documentation reviews.
• Confirm the product lifecycle status recorded as Prod. Cancellation in records.

Parameters are factual source fields retained for model review.

• Physical dimensions are recorded as 10.00 x 10.00 x 6.5 cm for space planning. Check product-owned images, label text, connector area, and submitted model references against the exact 6AG1195-7HB00-7XA0 record before publication.
• Net weight is listed as 0.135 Kg for logistics and mounting calculations.
• Temperature ratings specify a wide operational window from -40°C up to +70°C.
• Startup threshold is defined at -25°C ensuring functionality in cold starts.
• Module capacity allows for holding two IM 153-2 Red units simultaneously.

• Inspect the front panel for clear labeling of the Siemens brand identifier. Review Siemens 6AG1195-7HB00-7XA0 as I/O Modules with source category io-modules, recorded lifecycle Prod. Cancellation, and submitted model identity.
• Check connector positions for alignment with standard ET 200M mounting rails.
• Verify the presence of conformal coating indicators on the circuit board surface.
• Review terminal blocks for signs of wear or damage before submission.

• Prepare project documents specifying the required operating temperature range for validation. Keep dimensions 10.00 x 10.00 x 6.5 cm and net weight 0.135 Kg unchanged while comparing project documents and product image evidence.
• Include system diagrams showing the integration of two IM 153-2 Red modules.
• Document the physical space constraints matching the 10.00 x 10.00 x 6.5 cm footprint.
• Reference the base model 6ES7195-7HB00-0XA0 when discussing technical application context needs.

• Confirm the exact part number matches the inquiry request for accuracy. Check product-owned images, label text, connector area, and submitted model references against the exact 6AG1195-7HB00-7XA0 record before publication.
• Assess the need for conformal coating based on specific site environmental factors.
• Evaluate the redundancy requirements involving IM 153-2 Red module integration.
• Note the production cancellation status when planning long-term maintenance strategies.