6AG1193-6BP40-7DA1 Industrial Automation Component

Part number

6AG1193-6BP40-7DA1

Brand

Siemens

Category

I/O Modules

Product type

I/O Modules

Lifecycle

Active Product

Dimensions

14.8 x 4.00 x 2.8 cm

Net weight

0.059 Kg

Source category

SIPLUS BaseUnits

• This unit is based on the 6ES7193-6BP40-0DA1 architecture but includes specific SIPLUS enhancements. Keep dimensions 14.8 x 4.00 x 2.8 cm and net weight 0.059 Kg unchanged while comparing project documents and product image evidence.
• Conformal coating is applied to protect internal circuitry from moisture, dust, and corrosive agents.
• The operating temperature range extends from -40 degrees Celsius up to +70 degrees Celsius.
• Terminal type A1 utilizes push-in connection technology for efficient wiring and maintenance procedures.
• The module includes two sets of five add-on terminals for expanded signal connectivity options.
• A new load group classification is recorded for this specific variant of the base unit.

• The part number 6AG1193-6BP40-7DA1 identifies this specific SIPLUS variant of the ET 200SP. Use the source path Automation technology / ET 200SP / SIPLUS BaseUnits to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• BU15-P16+A0+12D/T denotes the base unit configuration with specific terminal and diagnostic features.
• The suffix 7DA1 distinguishes this unit from standard versions like the 0DA1 counterpart.
• Temperature acquisition capabilities are integrated into the design for monitoring environmental conditions directly.

Parameters are factual source fields retained for model review.

• Physical width is recorded as 15 millimeters, fitting standard DIN rail mounting configurations. Check product-owned images, label text, connector area, and submitted model references against the exact 6AG1193-6BP40-7DA1 record before publication.
• Height dimension is listed as 141 millimeters, requiring adequate vertical clearance in control cabinets.
• Net weight is specified at 0.059 kilograms, contributing minimal load to the mounting structure.
• The product class remains undefined in current documentation, focusing instead on functional specifications.
• Lifecycle status is active, indicating ongoing production and support for this industrial component.

• Visual inspection should confirm the presence of conformal coating on the internal PCB layers. Review Siemens 6AG1193-6BP40-7DA1 as I/O Modules with source category SIPLUS BaseUnits, recorded lifecycle Active Product, and submitted model identity.
• Check that push-in terminals are intact and free from debris before installation procedures.
• Verify the labeling matches the 6AG1193-6BP40-7DA1 identifier for accurate model identification purposes.
• Ensure the add-on terminal blocks are securely attached to the main base unit body.

• Review project documentation to confirm the required temperature range meets the -40 to +70 C specification.
• Verify that the control cabinet layout accommodates the 15 mm width and 141 mm height.
• Confirm that the wiring scheme supports the push-in terminal type A1 connection method.
• Assess whether the conformal coating provides sufficient protection for the intended industrial environment.

• Source parameter review indicates this is a specialized variant of the standard ET 200SP base.
• Technical documentation should be cross-referenced for detailed electrical characteristics and pin assignments.
• Installation guidelines must be followed to ensure proper grounding and signal integrity maintenance.
• Environmental ratings should be validated against site-specific conditions before finalizing the inquiry submission.