Siemens 6AG1193-6BP20-7BB0 Industrial Automation Component

Part number

6AG1193-6BP20-7BB0

Brand

Siemens

Category

I/O Modules

Product type

I/O Modules

Lifecycle

Active Product

Dimensions

12.2 x 4.5 x 2.8 cm

Net weight

0.057 Kg

Source category

SIPLUS BaseUnits

• Physical dimensions are listed as 12.2 centimeters in width, 4.5 centimeters in height, and 2.8 centimeters in depth for spatial planning. Keep dimensions 12.2 x 4.5 x 2.8 cm and net weight 0.057 Kg unchanged while comparing project documents and product image evidence.
• The net weight of the unit is recorded at 0.057 kilograms, facilitating easy handling during installation procedures.
• Operating temperature range extends from minus 40 degrees Celsius up to plus 70 degrees Celsius for extreme environments.
• Terminal configuration includes push-in type connections alongside four auxiliary terminals for additional signal routing needs.
• The base unit structure is derived from the 6ES7193-6BP20-0BB0 foundation with enhanced protective characteristics.
• Auxiliary terminals are bridged to the left side, providing specific electrical connectivity options for system integration.

• The part number 6AG1193-6BP20-7BB0 identifies this specific variant within the SIPLUS product family.
• This model is classified under the ET 200SP series, indicating its role in distributed I/O architectures.
• The designation BU20-P12+A4+0B reflects the specific configuration of base units and terminal types.
• Conformal coating application is a key identifier distinguishing this unit from standard industrial environment models.

Parameters are factual source fields retained for model review.

• Width measurement of 20 millimeters is noted for the physical footprint of the base unit assembly.
• Height specification of 117 millimeters defines the vertical space required for mounting on standard rails.
• Temperature rating confirms suitability for applications involving significant thermal variations during continuous operation cycles.
• Terminal type verification ensures correct wiring methods are applied during the initial setup phase.
• Bridging configuration details assist in understanding the electrical continuity between adjacent auxiliary connection points.

• Visual inspection should confirm the presence of push-in terminals on the front interface panel.
• Check for labeling that matches the part number 6AG1193-6BP20-7BB0 on the device housing.
• Verify the physical dimensions align with the recorded specifications of 12.2 cm by 4.5 cm.
• Ensure the auxiliary terminal block shows the correct bridging arrangement as documented in technical sheets.

• Gather project documentation specifying the required operating temperature range for the intended installation location.
• Confirm the physical space constraints match the dimensions of 12.2 cm width and 117 mm height.
• Review system architecture to ensure application context with the ET 200SP distributed I/O framework.
• Prepare technical queries regarding the conformal coating specifications for harsh environmental protection requirements.

• Cross-reference the part number with documented Siemens documentation for complete technical data accuracy.
• Validate the lifecycle status as Active Product to ensure ongoing support and documentation access.
• Assess the environmental ratings against the specific operational demands of the target industrial site.
• Confirm the terminal configuration meets the electrical requirements of the connected sensor or actuator devices.