Siemens 6AG1193-6BP20-7BA0 Industrial Automation Component

Part number

6AG1193-6BP20-7BA0

Brand

Siemens

Category

I/O Modules

Product type

I/O Modules

Lifecycle

Active Product

Dimensions

15.00 x 4.00 x 2.8 cm

Net weight

0.057 Kg

Source category

SIPLUS BaseUnits

• Conformal coating provides enhanced protection against moisture, dust, and corrosive agents. Keep dimensions 15.00 x 4.00 x 2.8 cm and net weight 0.057 Kg unchanged while comparing project documents and product image evidence.
• Operating temperature range spans from -40°C to +70°C for extreme conditions.
• Physical dimensions are recorded as 15.00 x 4.00 x 2.8 cm for space planning.
• Net weight is listed at 0.057 Kg, aiding in structural load calculations.
• Base configuration derives from 6ES7193-6BP20-0BA0 with specific SIPLUS modifications.
• Terminal type utilizes push-in technology for efficient wiring without screw tools.

• Part number 6AG1193-6BP20-7BA0 identifies the specific SIPLUS variant configuration. Use the source path Automation technology / ET 200SP / SIPLUS BaseUnits to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• Normalized identifier 6AG11936BP207BA0 ensures consistent digital tracking and reference.
• Brand designation confirms origin from Siemens industrial automation product lines.
• Lifecycle status indicates active product classification for current project documentation.

Parameters are factual source fields retained for model review.

• BU type A0 specification defines the fundamental base unit structural characteristics. Check product-owned images, label text, connector area, and submitted model references against the exact 6AG1193-6BP20-7BA0 record before publication.
• Push-in terminals allow for rapid connection of conductors without additional tools.
• Ten auxiliary terminals are included, providing additional points for signal distribution.
• Auxiliary terminals are bridged to the left, simplifying circuit continuity planning.
• Width and height measurements of 15 mm x 141 mm fit standard racks.

• Visual inspection should confirm the presence of conformal coating on surfaces. Review Siemens 6AG1193-6BP20-7BA0 as I/O Modules with source category SIPLUS BaseUnits, recorded lifecycle Active Product, and submitted model identity.
• Check terminal blocks for proper alignment and intact push-in mechanisms.
• Verify labeling matches the part number 6AG1193-6BP20-7BA0 exactly.
• Ensure physical dimensions correspond to the recorded 15.00 x 4.00 x 2.8 cm.

• Gather project specifications requiring operation between -40°C and +70°C temperatures. Keep dimensions 15.00 x 4.00 x 2.8 cm and net weight 0.057 Kg unchanged while comparing project documents and product image evidence.
• Document the need for ten auxiliary terminals with left-side bridging capability.
• Confirm space constraints align with the 15 mm width and 141 mm height.
• Specify the requirement for conformal coating due to harsh environmental exposure.

• Source parameter review should verify all technical values against documented datasheets. Check product-owned images, label text, connector area, and submitted model references against the exact 6AG1193-6BP20-7BA0 record before publication.
• Project document review must ensure environmental ratings match site conditions.
• Physical inspection guidelines help confirm component integrity before final submission.
• Technical summary points provide a structured basis for detailed engineering analysis.