6AG1193-6BP00-7BU0 SIPLUS ET 200SP Base Unit Details

Part number

6AG1193-6BP00-7BU0

Brand

Siemens

Category

I/O Modules

Product type

I/O Modules

Lifecycle

Active Product

Dimensions

12.5 x 4.00 x 3.00 cm

Net weight

0.061 Kg

Source category

SIPLUS BaseUnits

• Physical dimensions are recorded as 12.5 cm width by 4.00 cm height by 3.00 cm depth. Keep dimensions 12.5 x 4.00 x 3.00 cm and net weight 0.061 Kg unchanged while comparing project documents and product image evidence.
• The net weight of the unit is listed at 0.061 Kg for handling calculations.
• Operating temperature range is specified as -40 to +70 degrees Celsius for harsh conditions.
• Terminal type is identified as push-in connections without auxiliary terminals included in this configuration.
• The base unit type is classified as U0 within the SIPLUS extended product line structure.
• Bridging configuration is noted as bridged to the left side for standard assembly setups.

• Part number 6AG1193-6BP00-7BU0 corresponds to the SIPLUS ET 200SP BU20-P16+A0+2B variant. Use the source path Automation technology / ET 200SP / SIPLUS BaseUnits to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• This model is based on the reference design 6ES7193-6BP00-0BU0 with specific enhancements.
• Conformal coating application is a key identifier for this extended environmental protection series.
• The product class indicates review restrictions requiring direct contact with Siemens review contacts.

Parameters are factual source fields retained for model review.

• Width measurement is documented at 20 mm for the BU20 form factor specification. Check product-owned images, label text, connector area, and submitted model references against the exact 6AG1193-6BP00-7BU0 record before publication.
• Height dimension is recorded as 117 mm for vertical mounting rack application context checks.
• Temperature rating supports operation in extreme cold down to minus forty degrees Celsius.
• Thermal limit extends up to seventy degrees Celsius for high ambient heat scenarios.
• Coating type ensures resistance against moisture and corrosive agents in industrial settings.

• Visual inspection should confirm the presence of push-in terminal blocks on the front. Review Siemens 6AG1193-6BP00-7BU0 as I/O Modules with source category SIPLUS BaseUnits, recorded lifecycle Active Product, and submitted model identity.
• Check for labeling indicating the specific SIPLUS branding and part number clearly.
• Verify the physical dimensions match the recorded 12.5 x 4.00 x 3.00 cm specs.
• Ensure the unit shows no signs of damage to the conformal coating surface layer.

• Gather project requirements specifying the need for extended temperature range capabilities. Keep dimensions 12.5 x 4.00 x 3.00 cm and net weight 0.061 Kg unchanged while comparing project documents and product image evidence.
• Confirm the necessity for conformal coating to protect against harsh industrial environments.
• Review system architecture to ensure application context with ET 200SP distributed I/O racks.
• Prepare technical documents detailing the specific BU20-P16+A0+2B configuration needs for submission.

• Source parameter review confirms the active product status for current engineering projects.
• Model identification notes highlight the specific base unit variant within the product line.
• Technical summary points provide essential physical and operational data for assessment purposes.
• Inquiry preparation steps ensure all necessary technical details are included in submissions.