Siemens 6AG1193-6BP00-7BD0 Industrial Automation Component Details

Part number

6AG1193-6BP00-7BD0

Brand

Siemens

Category

I/O Modules

Product type

I/O Modules

Lifecycle

Prod. Cancellation

Dimensions

12.00 x 4.00 x 3.00 cm

Net weight

0.057 Kg

• Base model reference is recorded under 6ES7193-6BP00-0BD0 for architectural consistency. Keep dimensions 12.00 x 4.00 x 3.00 cm and net weight 0.057 Kg unchanged while comparing project documents and product image evidence.
• Conformal coating application ensures durability against harsh industrial atmospheric conditions.
• Operating temperature range spans from minus forty degrees to plus seventy degrees Celsius.
• BU type D0 configuration defines the specific hardware variant and interface standards.
• Push-in terminal technology facilitates rapid wiring connections without requiring additional tools.
• Auxiliary terminals are not included in this specific configuration or model variant.

• The part number 6AG1193-6BP00-7BD0 identifies this specific SIPLUS ET 200SP variant. Use the source path io-modules to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• Product class B indicates review restrictions requiring direct contact with Siemens review contacts.
• Lifecycle status is listed as Production Cancellation for inventory planning purposes.
• Dimensions are recorded as twelve by four by three centimeters for space planning.

Parameters are factual source fields retained for model review.

• Net weight is documented at zero point zero five seven kilograms for logistics. Check product-owned images, label text, connector area, and submitted model references against the exact 6AG1193-6BP00-7BD0 record before publication.
• Width and height measurements are twenty millimeters by one hundred seventeen millimeters.
• Terminal bridging is configured to the left side of the module unit.
• Source parameter review should verify physical fit within existing control cabinet layouts.
• Project document review must account for the extended temperature operational capabilities.

• Visual inspection confirms the presence of push-in terminal connection points. Review Siemens 6AG1193-6BP00-7BD0 as I/O Modules with source category io-modules, recorded lifecycle Prod. Cancellation, and submitted model identity.
• Labeling displays the full part number for accurate model identification verification.
• Physical condition shows standard industrial housing consistent with SIPLUS product lines.
• Connector orientation aligns with typical ET 200SP mounting and wiring practices.

• Verify project requirements against the specified minus forty to plus seventy degree range. Keep dimensions 12.00 x 4.00 x 3.00 cm and net weight 0.057 Kg unchanged while comparing project documents and product image evidence.
• Confirm that push-in terminals meet the wiring specifications of your installation.
• Check if the absence of auxiliary terminals impacts your circuit design needs.
• Prepare technical documents referencing the base model 6ES7193-6BP00-0BD0 for comparison.

• Source parameter review is essential before initiating any inquiry preparation discussions. Check product-owned images, label text, connector area, and submitted model references against the exact 6AG1193-6BP00-7BD0 record before publication.
• Project document review helps ensure alignment with current engineering specifications.
• Technical summary points provide a quick reference for initial assessment stages.
• Model identification notes clarify the specific variant and its associated restrictions.