6AG1155-5BA00-2AB0 SIPLUS Interface Module Details

Part number

6AG1155-5BA00-2AB0

Brand

Siemens

Category

I/O Modules

Product type

I/O Modules

Lifecycle

Active Product

Dimensions

15.00 x 15.00 x 4.5 cm

Net weight

0.419 Kg

Source category

SIPLUS IM 155-5 DP

• Operating temperature range spans from minus forty to plus sixty degrees Celsius continuously. Keep dimensions 15.00 x 15.00 x 4.5 cm and net weight 0.419 Kg unchanged while comparing project documents and product image evidence.
• Startup capability is maintained at temperatures as low as minus twenty-five degrees Celsius.
• Conformal coating provides additional protection against moisture, dust, and corrosive agents in the field.
• The module connects via PROFIBUS DP interface for reliable data transmission in automation networks.
• It serves as an extension for SIPLUS ET 200MP stations within distributed I/O architectures.
• Maximum capacity allows connection of up to twelve S7-1500 modules per interface point.

• Base model reference links to the standard 6ES7155-5BA00-0AB0 configuration for comparison. Use the source path Automation technology / SIPLUS interface modules / SIPLUS IM 155-5 DP to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• SIPLUS designation indicates enhanced environmental ratings beyond standard industrial automation component limits.
• ET 200MP series identifies the modular distributed I/O system platform integration method.
• DP suffix denotes PROFIBUS DP communication protocol support for master-slave network topology.

Parameters are factual source fields retained for model review.

• Physical dimensions are recorded as fifteen centimeters by fifteen centimeters by four point five centimeters. Check product-owned images, label text, connector area, and submitted model references against the exact 6AG1155-5BA00-2AB0 record before publication.
• Net weight is listed at zero point four one nine kilograms for logistics planning.
• Lifecycle status is confirmed as an active product for ongoing engineering projects.
• Product class B indicates specific handling procedures may apply during project documentation review.
• Environmental rating supports operation in extreme temperatures requiring robust electronic component selection.

• Visual inspection should confirm the presence of conformal coating on visible circuit areas. Review Siemens 6AG1155-5BA00-2AB0 as I/O Modules with source category SIPLUS IM 155-5 DP, recorded lifecycle Active Product, and submitted model identity.
• Labeling must clearly display the full part number for accurate inventory verification.
• Connector orientation should match PROFIBUS DP standard pinout configurations for network integration.
• Mounting rail application context aligns with standard DIN rail installation practices in control cabinets.

• Verify project temperature requirements against the specified minus forty to plus sixty degree range. Keep dimensions 15.00 x 15.00 x 4.5 cm and net weight 0.419 Kg unchanged while comparing project documents and product image evidence.
• Confirm PROFIBUS network topology supports the maximum twelve-module connection limit per interface.
• Assess environmental conditions to ensure conformal coating meets specific corrosion protection needs.
• Prepare technical documentation referencing the base model 6ES7155-5BA00-0AB0 for comparative analysis.

• Ensure all technical specifications align with current project engineering standards and requirements.
• Cross-reference dimensional data with existing cabinet space allocations for physical fitment validation.
• Document any special handling instructions associated with the product class classification noted.
• Validate communication protocol settings before initiating formal inquiry preparation inquiry submission processes.