6AG1136-6PA00-2BC0 Siemens SIPLUS ET 200SP F-PM-E

Part number

6AG1136-6PA00-2BC0

Brand

Siemens

Category

I/O Modules

Product type

I/O Modules

Lifecycle

Active Product

Dimensions

7.7 x 6.7 x 2.4 cm

Net weight

0.084 Kg

• The device operates within a temperature range of -30 to +60 degrees Celsius. This extended range supports demanding industrial conditions effectively.
• It features two safe digital inputs and one safe digital output for PPM control. These inputs ensure precise monitoring of safety circuits.
• The module achieves Performance Level D or SIL2 for safe shutdown operations. Higher ratings of PL E or SIL3 are also supported depending on configuration.
• Conformal coating protects internal components against moisture and corrosive agents. This feature enhances durability in challenging operational settings significantly.
• The net weight is listed as 0.084 kilograms for logistical planning purposes. Dimensions measure 7.7 by 6.7 by 2.4 centimeters compactly.
• Based on the 6ES7136-6PA00-0BC0 foundation, it integrates advanced safety protocols. The structure ensures reliable performance in critical automation tasks.

• The part number 6AG1136-6PA00-2BC0 identifies this specific SIPLUS variant. It distinguishes the unit from standard ET 200SP models clearly.
• Lifecycle status is recorded as Active Product for current projects. This indicates ongoing production and support review details for new implementations.
• Product class B notes indicate review restrictions apply to this item. Users should consult their designated Siemens contact for handling procedures.
• The normalized part number 6AG11366PA002BC0 serves as the primary identifier. This format is used for database indexing and search optimization purposes.

Parameters are factual source fields retained for model review.

• Review the voltage specification of 24 V DC for power supply alignment. Ensure your system matches this requirement for proper operation.
• Check the current rating of 8 A for load capacity verification. This parameter defines the maximum safe output current limits.
• Verify the PROFIsafe communication protocol for network integration planning. application context with existing safety networks is essential for successful deployment.
• Examine the physical dimensions for rack space allocation calculations. Accurate measurements help in designing efficient control cabinet layouts effectively.

• Inspect the front panel labeling for the exact part number confirmation. Clear markings assist in quick identification during installation phases.
• Observe the connector layout for wiring diagram reference accuracy. Proper connection points are crucial for maintaining signal integrity.
• Note the housing material for environmental resistance assessment. The robust design supports the specified temperature and coating requirements.
• Review the indicator lights for status monitoring capabilities. Visual feedback aids in troubleshooting and operational awareness during runtime.

• Gather project documentation specifying the required safety integrity level. This information helps tailor the inquiry to your exact needs.
• Confirm the ambient temperature conditions at the installation site. The -30 to +60 C range must cover your operational environment.
• List the number of safe digital inputs and outputs needed. Matching these counts ensures the module fits your control scheme.
• Prepare details regarding the PROFIsafe network topology and addresses. This data facilitates accurate technical evaluation and response generation.

• Ensure all technical parameters match your system design specifications. Discrepancies may require alternative solutions or custom configurations.
• Verify the review restriction policy before finalizing inquiry preparation plans. Understanding these terms prevents logistical issues during the acquisition phase.
• Cross-reference the conformal coating benefits with your maintenance schedule. Enhanced protection may reduce cleaning frequency and downtime requirements.
• Submit the inquiry with complete project context for accurate responses. Detailed information enables faster and more relevant technical support.