Siemens 6AG1135-6HB00-2DA1 SIPLUS ET 200SP Analog Output Module

Part number

6AG1135-6HB00-2DA1

Brand

Siemens

Category

I/O Modules

Product type

I/O Modules

Lifecycle

Active Product

Dimensions

7.7 x 7.00 x 2.5 cm

Net weight

0.042 Kg

Source category

SIPLUS analog outputs

• This analog output module delivers two channels for voltage or current signals with high-speed performance capabilities.
• The device operates within an extended temperature range of minus forty to plus sixty degrees Celsius.
• Conformal coating is applied to protect sensitive electronic components against moisture, dust, and corrosive agents.
• Channel diagnostics are integrated to monitor signal status and detect potential faults during operation cycles.
• A sixteen-bit resolution ensures accurate data conversion with a specified accuracy of plus or minus zero point three percent.
• The physical dimensions measure seven point seven by seven point zero by two point five centimeters for compact integration.

• The part number 6AG1135-6HB00-2DA1 identifies this specific variant within the broader ET 200SP product family.
• This model is classified as an active product, indicating ongoing manufacturing and support from the original equipment manufacturer.
• The base hardware reference links to the 6ES7135-6HB00-0DA1, highlighting the foundational design upon which this unit is built.
• Color code CC00 is recorded under the product specifications to assist in visual identification during installation procedures.

Parameters are factual source fields retained for model review.

• Net weight is listed as zero point zero four two kilograms, facilitating easy handling and mounting logistics.
• The product class indicates a review restriction, requiring direct contact with designated Siemens review contacts for processing.
• Signal type is defined as analog output, listed for controlling actuators, valves, or other process control devices.
• Resolution parameters confirm sixteen-bit precision, ensuring fine-grained control over output signals in automated systems.
• Accuracy metrics specify a tolerance of plus or minus zero point three percent for reliable measurement standards.

• Visual inspection should verify the presence of conformal coating on the exposed circuit board areas.
• Check labeling for the exact part number 6AG1135-6HB00-2DA1 to ensure correct model identification.
• Examine connector pins for damage or corrosion that might affect electrical connectivity during operation.
• Confirm the physical dimensions match the stated seven point seven by seven point zero by two point five centimeters.

• Prepare project documentation detailing the required operating temperature range and environmental conditions for the installation site.
• Verify the need for channel diagnostics and high-speed performance in your specific automation control strategy.
• Review the product class restrictions to understand the review note and contact requirements for inquiry preparation.
• Compile technical specifications including voltage, current ranges, and resolution requirements for accurate system integration planning.

• Ensure all technical parameters align with the control system requirements before initiating the inquiry process.
• Confirm that the extended temperature range meets the operational needs of the intended industrial environment.
• Review the conformal coating specifications to verify protection levels against specific contaminants present at the site.
• Validate the part number and color code details to prevent request errors during the inquiry preparation phase.