6AG1134-6JF00-2CA1 SIPLUS Analog Input Module Specifications

Part number

6AG1134-6JF00-2CA1

Brand

Siemens

Category

I/O Modules

Product type

I/O Modules

Lifecycle

Active Product

Dimensions

7.7 x 6.7 x 2.5 cm

Net weight

0.04 Kg

Source category

SIPLUS analog inputs

• Eight channels support RTD and TC connections using a two-wire configuration method. Keep dimensions 7.7 x 6.7 x 2.5 cm and net weight 0.04 Kg unchanged while comparing project documents and product image evidence.
• Resolution is set at sixteen bits for accurate signal processing and data conversion.
• Accuracy is specified at plus or minus zero point one percent of full scale.
• Operating temperature range spans from minus forty degrees Celsius to plus sixty degrees Celsius.
• Physical dimensions measure seven point seven by six point seven by two point five centimeters.
• Net weight is recorded at zero point zero four kilograms for lightweight integration needs.

• Base model reference is 6ES7134-6JF00-0CA1 for architectural comparison and structural understanding. Use the source path Automation technology / ET 200SP / SIPLUS I/O modules / SIPLUS analog inputs to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• Channel diagnostics are enabled to monitor signal integrity and detect wiring faults effectively.
• Color code CC00 is listed for visual identification during installation and maintenance procedures.
• Module designation A1 indicates the specific slot position within the ET 200SP rack.

Parameters are factual source fields retained for model review.

• Input type supports both resistance temperature detectors and thermocouple measurements simultaneously. Check product-owned images, label text, connector area, and submitted model references against the exact 6AG1134-6JF00-2CA1 record before publication.
• Conformal coating provides additional protection against chemical exposure and extreme humidity levels.
• Extended temperature rating allows operation in environments exceeding standard industrial limits significantly.
• Signal processing utilizes sixteen-bit resolution to ensure precise analog-to-digital conversion accuracy.
• Diagnostic features help identify open circuits or short circuits within the sensor wiring.

• Front view displays the connection terminals for sensor wiring and power supply. Review Siemens 6AG1134-6JF00-2CA1 as I/O Modules with source category SIPLUS analog inputs, recorded lifecycle Active Product, and submitted model identity.
• Side profile shows the compact form factor listed for dense control cabinet layouts.
• Label area contains the part number and Siemens branding for clear identification.
• Mounting rail interface is visible, indicating the snap-on installation mechanism design.

• Verify the required sensor types match the supported RTD and TC configurations. Keep dimensions 7.7 x 6.7 x 2.5 cm and net weight 0.04 Kg unchanged while comparing project documents and product image evidence.
• Confirm environmental conditions align with the extended temperature range specifications provided.
• Check rack slot review details to ensure proper placement of module A1 designation.
• Review project documentation for any specific diagnostic requirements or color coding standards.

• Ensure all technical parameters match the specific application requirements before submission.
• Cross-reference the base model number for any architectural differences in design.
• Validate the conformal coating necessity based on the specific environmental hazards present.
• Document the channel count and resolution needs to confirm suitability for the task.