6AG1132-6FD00-7CU0 Digital Output Module Inquiry Details

Part number

6AG1132-6FD00-7CU0

Brand

Siemens

Category

I/O Modules

Product type

SIPLUS ET 200SP DQ 4x24

Lifecycle

Active Product

Dimensions

7.7 x 6.8 x 3.00 cm

Net weight

0.064 Kg

Source category

SIPLUS digital outputs

• The device is based on the 6ES7132-6FD00-0CU0 hardware platform structure for reliable performance. Keep dimensions 7.7 x 6.8 x 3.00 cm and net weight 0.064 Kg unchanged while comparing project documents and product image evidence.
• It provides four digital output channels rated at 24 volts DC with high frequency capability.
• Each channel supports a current load of up to 2 amperes for connected loads.
• Conformal coating is applied to protect internal components from environmental stress factors effectively.
• Channel diagnostics are included to monitor the status of each individual output circuit.
• The color code CC20 identifies this specific variant within the broader product family lineup.

• The part number 6AG1132-6FD00-7CU0 uniquely identifies this specific SIPLUS configuration for tracking. Use the source path Automation technology / ET 200SP / SIPLUS I/O modules / SIPLUS digital outputs to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• This model belongs to the ET 200SP distributed I/O system product line.
• It is classified under the SIPLUS digital outputs category for specialized applications.
• The lifecycle status is recorded as an Active Product for ongoing project planning.

Parameters are factual source fields retained for model review.

• Physical dimensions are listed as 7.7 cm in width by 6.8 cm in depth. Check product-owned images, label text, connector area, and submitted model references against the exact 6AG1132-6FD00-7CU0 record before publication.
• The height of the module is recorded as 3.00 cm for rack mounting.
• Net weight is specified as 0.064 kilograms for logistics and handling calculations.
• Operating voltage is defined as 230VAC with a maximum current of 2A per channel.
• Temperature range extends from -40 degrees Celsius to +70 degrees Celsius for operation.

• Visual inspection should confirm the presence of conformal coating on the circuit board. Review Siemens 6AG1132-6FD00-7CU0 as SIPLUS ET 200SP DQ 4x24 with source category SIPLUS digital outputs, recorded lifecycle Active Product, and submitted model identity.
• Check that the label displays the full part number 6AG1132-6FD00-7CU0 clearly.
• Verify the color code CC20 marking is visible on the module front face.
• Ensure the channel indicators align with the four digital output channel configuration.

• Prepare your project requirements specifying the need for harsh environment protection features. Keep dimensions 7.7 x 6.8 x 3.00 cm and net weight 0.064 Kg unchanged while comparing project documents and product image evidence.
• Document the required operating temperature range to ensure suitability for your site conditions.
• List the total number of digital output channels needed for your automation setup.
• Include any specific diagnostic requirements for monitoring channel status during operation phases.

• Confirm the class B restriction applies to your inquiry preparation guidelines and procedures.
• Note that contact with a Siemens review contacts may be required for this item.
• Review the source parameter review sheet for detailed electrical specifications and limits.
• Ensure project document review includes all environmental ratings for compliance verification steps.